Cloudwatch Logs

associate_kms_key(kms_key_id)
associate_kms_key(kms_key_id, params::Dict{String,<:Any})

Associates the specified KMS key with either one log group in the account, or with all stored CloudWatch Logs query insights results in the account. When you use AssociateKmsKey, you specify either the logGroupName parameter or the resourceIdentifier parameter. You can't specify both of those parameters in the same operation. Specify the logGroupName parameter to cause all log events stored in the log group to be encrypted with that key. Only the log events ingested after the key is associated are encrypted with that key. Associating a KMS key with a log group overrides any existing associations between the log group and a KMS key. After a KMS key is associated with a log group, all newly ingested data for the log group is encrypted using the KMS key. This association is stored as long as the data encrypted with the KMS key is still within CloudWatch Logs. This enables CloudWatch Logs to decrypt this data whenever it is requested. Associating a key with a log group does not cause the results of queries of that log group to be encrypted with that key. To have query results encrypted with a KMS key, you must use an AssociateKmsKey operation with the resourceIdentifier parameter that specifies a query-result resource. Specify the resourceIdentifier parameter with a query-result resource, to use that key to encrypt the stored results of all future StartQuery operations in the account. The response from a GetQueryResults operation will still return the query results in plain text. Even if you have not associated a key with your query results, the query results are encrypted when stored, using the default CloudWatch Logs method. If you run a query from a monitoring account that queries logs in a source account, the query results key from the monitoring account, if any, is used. If you delete the key that is used to encrypt log events or log group query results, then all the associated stored log events or query results that were encrypted with that key will be unencryptable and unusable. CloudWatch Logs supports only symmetric KMS keys. Do not use an associate an asymmetric KMS key with your log group or query results. For more information, see Using Symmetric and Asymmetric Keys. It can take up to 5 minutes for this operation to take effect. If you attempt to associate a KMS key with a log group but the KMS key does not exist or the KMS key is disabled, you receive an InvalidParameterException error.

Arguments

• kms_key_id: The Amazon Resource Name (ARN) of the KMS key to use when encrypting log data. This must be a symmetric KMS key. For more information, see Amazon Resource Names and Using Symmetric and Asymmetric Keys.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "logGroupName": The name of the log group. In your AssociateKmsKey operation, you must specify either the resourceIdentifier parameter or the logGroup parameter, but you can't specify both.
• "resourceIdentifier": Specifies the target for this operation. You must specify one of the following: Specify the following ARN to have future GetQueryResults operations in this account encrypt the results with the specified KMS key. Replace REGION and ACCOUNTID with your Region and account ID. arn:aws:logs:REGION:ACCOUNTID:query-result:* Specify the ARN of a log group to have CloudWatch Logs use the KMS key to encrypt log events that are ingested and stored by that log group. The log group ARN must be in the following format. Replace REGION and ACCOUNTID with your Region and account ID. arn:aws:logs:REGION:ACCOUNTID:log-group:LOGGROUPNAME In your AssociateKmsKey operation, you must specify either the resourceIdentifier parameter or the logGroup parameter, but you can't specify both.

cancel_export_task(task_id)
cancel_export_task(task_id, params::Dict{String,<:Any})

Cancels the specified export task. The task must be in the PENDING or RUNNING state.

Arguments

• task_id: The ID of the export task.

create_delivery(delivery_destination_arn, delivery_source_name)
create_delivery(delivery_destination_arn, delivery_source_name, params::Dict{String,<:Any})

Creates a delivery. A delivery is a connection between a logical delivery source and a logical delivery destination that you have already created. Only some Amazon Web Services services support being configured as a delivery source using this operation. These services are listed as Supported [V2 Permissions] in the table at Enabling logging from Amazon Web Services services. A delivery destination can represent a log group in CloudWatch Logs, an Amazon S3 bucket, or a delivery stream in Firehose. To configure logs delivery between a supported Amazon Web Services service and a destination, you must do the following: Create a delivery source, which is a logical object that represents the resource that is actually sending the logs. For more information, see PutDeliverySource. Create a delivery destination, which is a logical object that represents the actual delivery destination. For more information, see PutDeliveryDestination. If you are delivering logs cross-account, you must use PutDeliveryDestinationPolicy in the destination account to assign an IAM policy to the destination. This policy allows delivery to that destination. Use CreateDelivery to create a delivery by pairing exactly one delivery source and one delivery destination. You can configure a single delivery source to send logs to multiple destinations by creating multiple deliveries. You can also create multiple deliveries to configure multiple delivery sources to send logs to the same delivery destination. You can't update an existing delivery. You can only create and delete deliveries.

Arguments

• delivery_destination_arn: The ARN of the delivery destination to use for this delivery.
• delivery_source_name: The name of the delivery source to use for this delivery.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "tags": An optional list of key-value pairs to associate with the resource. For more information about tagging, see Tagging Amazon Web Services resources

create_export_task(destination, from, log_group_name, to)
create_export_task(destination, from, log_group_name, to, params::Dict{String,<:Any})

Creates an export task so that you can efficiently export data from a log group to an Amazon S3 bucket. When you perform a CreateExportTask operation, you must use credentials that have permission to write to the S3 bucket that you specify as the destination. Exporting log data to S3 buckets that are encrypted by KMS is supported. Exporting log data to Amazon S3 buckets that have S3 Object Lock enabled with a retention period is also supported. Exporting to S3 buckets that are encrypted with AES-256 is supported. This is an asynchronous call. If all the required information is provided, this operation initiates an export task and responds with the ID of the task. After the task has started, you can use DescribeExportTasks to get the status of the export task. Each account can only have one active (RUNNING or PENDING) export task at a time. To cancel an export task, use CancelExportTask. You can export logs from multiple log groups or multiple time ranges to the same S3 bucket. To separate log data for each export task, specify a prefix to be used as the Amazon S3 key prefix for all exported objects. Time-based sorting on chunks of log data inside an exported file is not guaranteed. You can sort the exported log field data by using Linux utilities.

Arguments

• destination: The name of S3 bucket for the exported log data. The bucket must be in the same Amazon Web Services Region.
• from: The start time of the range for the request, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. Events with a timestamp earlier than this time are not exported.
• log_group_name: The name of the log group.
• to: The end time of the range for the request, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. Events with a timestamp later than this time are not exported. You must specify a time that is not earlier than when this log group was created.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "destinationPrefix": The prefix used as the start of the key for every object exported. If you don't specify a value, the default is exportedlogs.
• "logStreamNamePrefix": Export only log streams that match the provided prefix. If you don't specify a value, no prefix filter is applied.
• "taskName": The name of the export task.

create_log_anomaly_detector(log_group_arn_list)
create_log_anomaly_detector(log_group_arn_list, params::Dict{String,<:Any})

Creates an anomaly detector that regularly scans one or more log groups and look for patterns and anomalies in the logs. An anomaly detector can help surface issues by automatically discovering anomalies in your log event traffic. An anomaly detector uses machine learning algorithms to scan log events and find patterns. A pattern is a shared text structure that recurs among your log fields. Patterns provide a useful tool for analyzing large sets of logs because a large number of log events can often be compressed into a few patterns. The anomaly detector uses pattern recognition to find anomalies, which are unusual log events. It uses the evaluationFrequency to compare current log events and patterns with trained baselines. Fields within a pattern are called tokens. Fields that vary within a pattern, such as a request ID or timestamp, are referred to as dynamic tokens and represented by <>. The following is an example of a pattern: [INFO] Request time: <> ms This pattern represents log events like [INFO] Request time: 327 ms and other similar log events that differ only by the number, in this csse 327. When the pattern is displayed, the different numbers are replaced by <*> Any parts of log events that are masked as sensitive data are not scanned for anomalies. For more information about masking sensitive data, see Help protect sensitive log data with masking.

Arguments

• log_group_arn_list: An array containing the ARN of the log group that this anomaly detector will watch. You can specify only one log group ARN.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "anomalyVisibilityTime": The number of days to have visibility on an anomaly. After this time period has elapsed for an anomaly, it will be automatically baselined and the anomaly detector will treat new occurrences of a similar anomaly as normal. Therefore, if you do not correct the cause of an anomaly during the time period specified in anomalyVisibilityTime, it will be considered normal going forward and will not be detected as an anomaly.
• "detectorName": A name for this anomaly detector.
• "evaluationFrequency": Specifies how often the anomaly detector is to run and look for anomalies. Set this value according to the frequency that the log group receives new logs. For example, if the log group receives new log events every 10 minutes, then 15 minutes might be a good setting for evaluationFrequency .
• "filterPattern": You can use this parameter to limit the anomaly detection model to examine only log events that match the pattern you specify here. For more information, see Filter and Pattern Syntax.
• "kmsKeyId": Optionally assigns a KMS key to secure this anomaly detector and its findings. If a key is assigned, the anomalies found and the model used by this detector are encrypted at rest with the key. If a key is assigned to an anomaly detector, a user must have permissions for both this key and for the anomaly detector to retrieve information about the anomalies that it finds. For more information about using a KMS key and to see the required IAM policy, see Use a KMS key with an anomaly detector.
• "tags": An optional list of key-value pairs to associate with the resource. For more information about tagging, see Tagging Amazon Web Services resources

create_log_group(log_group_name)
create_log_group(log_group_name, params::Dict{String,<:Any})

Creates a log group with the specified name. You can create up to 1,000,000 log groups per Region per account. You must use the following guidelines when naming a log group: Log group names must be unique within a Region for an Amazon Web Services account. Log group names can be between 1 and 512 characters long. Log group names consist of the following characters: a-z, A-Z, 0-9, '_' (underscore), '-' (hyphen), '/' (forward slash), '.' (period), and '#' (number sign) Log group names can't start with the string aws/ When you create a log group, by default the log events in the log group do not expire. To set a retention policy so that events expire and are deleted after a specified time, use PutRetentionPolicy. If you associate an KMS key with the log group, ingested data is encrypted using the KMS key. This association is stored as long as the data encrypted with the KMS key is still within CloudWatch Logs. This enables CloudWatch Logs to decrypt this data whenever it is requested. If you attempt to associate a KMS key with the log group but the KMS key does not exist or the KMS key is disabled, you receive an InvalidParameterException error. CloudWatch Logs supports only symmetric KMS keys. Do not associate an asymmetric KMS key with your log group. For more information, see Using Symmetric and Asymmetric Keys.

Arguments

• log_group_name: A name for the log group.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "kmsKeyId": The Amazon Resource Name (ARN) of the KMS key to use when encrypting log data. For more information, see Amazon Resource Names.
• "logGroupClass": Use this parameter to specify the log group class for this log group. There are two classes: The Standard log class supports all CloudWatch Logs features. The Infrequent Access log class supports a subset of CloudWatch Logs features and incurs lower costs. If you omit this parameter, the default of STANDARD is used. The value of logGroupClass can't be changed after a log group is created. For details about the features supported by each class, see Log classes
• "tags": The key-value pairs to use for the tags. You can grant users access to certain log groups while preventing them from accessing other log groups. To do so, tag your groups and use IAM policies that refer to those tags. To assign tags when you create a log group, you must have either the logs:TagResource or logs:TagLogGroup permission. For more information about tagging, see Tagging Amazon Web Services resources. For more information about using tags to control access, see Controlling access to Amazon Web Services resources using tags.

create_log_stream(log_group_name, log_stream_name)
create_log_stream(log_group_name, log_stream_name, params::Dict{String,<:Any})

Creates a log stream for the specified log group. A log stream is a sequence of log events that originate from a single source, such as an application instance or a resource that is being monitored. There is no limit on the number of log streams that you can create for a log group. There is a limit of 50 TPS on CreateLogStream operations, after which transactions are throttled. You must use the following guidelines when naming a log stream: Log stream names must be unique within the log group. Log stream names can be between 1 and 512 characters long. Don't use ':' (colon) or '*' (asterisk) characters.

Arguments

• log_group_name: The name of the log group.
• log_stream_name: The name of the log stream.

delete_account_policy(policy_name, policy_type)
delete_account_policy(policy_name, policy_type, params::Dict{String,<:Any})

Deletes a CloudWatch Logs account policy. This stops the policy from applying to all log groups or a subset of log groups in the account. Log-group level policies will still be in effect. To use this operation, you must be signed on with the correct permissions depending on the type of policy that you are deleting. To delete a data protection policy, you must have the logs:DeleteDataProtectionPolicy and logs:DeleteAccountPolicy permissions. To delete a subscription filter policy, you must have the logs:DeleteSubscriptionFilter and logs:DeleteAccountPolicy permissions.

Arguments

• policy_name: The name of the policy to delete.
• policy_type: The type of policy to delete.

delete_data_protection_policy(log_group_identifier)
delete_data_protection_policy(log_group_identifier, params::Dict{String,<:Any})

Deletes the data protection policy from the specified log group. For more information about data protection policies, see PutDataProtectionPolicy.

Arguments

• log_group_identifier: The name or ARN of the log group that you want to delete the data protection policy for.

delete_delivery(id)
delete_delivery(id, params::Dict{String,<:Any})

Deletes s delivery. A delivery is a connection between a logical delivery source and a logical delivery destination. Deleting a delivery only deletes the connection between the delivery source and delivery destination. It does not delete the delivery destination or the delivery source.

Arguments

• id: The unique ID of the delivery to delete. You can find the ID of a delivery with the DescribeDeliveries operation.

delete_delivery_destination(name)
delete_delivery_destination(name, params::Dict{String,<:Any})

Deletes a delivery destination. A delivery is a connection between a logical delivery source and a logical delivery destination. You can't delete a delivery destination if any current deliveries are associated with it. To find whether any deliveries are associated with this delivery destination, use the DescribeDeliveries operation and check the deliveryDestinationArn field in the results.

Arguments

• name: The name of the delivery destination that you want to delete. You can find a list of delivery destionation names by using the DescribeDeliveryDestinations operation.

delete_delivery_destination_policy(delivery_destination_name)
delete_delivery_destination_policy(delivery_destination_name, params::Dict{String,<:Any})

Deletes a delivery destination policy. For more information about these policies, see PutDeliveryDestinationPolicy.

Arguments

• delivery_destination_name: The name of the delivery destination that you want to delete the policy for.

delete_delivery_source(name)
delete_delivery_source(name, params::Dict{String,<:Any})

Deletes a delivery source. A delivery is a connection between a logical delivery source and a logical delivery destination. You can't delete a delivery source if any current deliveries are associated with it. To find whether any deliveries are associated with this delivery source, use the DescribeDeliveries operation and check the deliverySourceName field in the results.

Arguments

• name: The name of the delivery source that you want to delete.

delete_destination(destination_name)
delete_destination(destination_name, params::Dict{String,<:Any})

Deletes the specified destination, and eventually disables all the subscription filters that publish to it. This operation does not delete the physical resource encapsulated by the destination.

Arguments

• destination_name: The name of the destination.

delete_log_anomaly_detector(anomaly_detector_arn)
delete_log_anomaly_detector(anomaly_detector_arn, params::Dict{String,<:Any})

Deletes the specified CloudWatch Logs anomaly detector.

Arguments

• anomaly_detector_arn: The ARN of the anomaly detector to delete. You can find the ARNs of log anomaly detectors in your account by using the ListLogAnomalyDetectors operation.

delete_log_group(log_group_name)
delete_log_group(log_group_name, params::Dict{String,<:Any})

Deletes the specified log group and permanently deletes all the archived log events associated with the log group.

Arguments

• log_group_name: The name of the log group.

delete_log_stream(log_group_name, log_stream_name)
delete_log_stream(log_group_name, log_stream_name, params::Dict{String,<:Any})

Deletes the specified log stream and permanently deletes all the archived log events associated with the log stream.

Arguments

• log_group_name: The name of the log group.
• log_stream_name: The name of the log stream.

delete_metric_filter(filter_name, log_group_name)
delete_metric_filter(filter_name, log_group_name, params::Dict{String,<:Any})

Deletes the specified metric filter.

Arguments

• filter_name: The name of the metric filter.
• log_group_name: The name of the log group.

delete_query_definition(query_definition_id)
delete_query_definition(query_definition_id, params::Dict{String,<:Any})

Deletes a saved CloudWatch Logs Insights query definition. A query definition contains details about a saved CloudWatch Logs Insights query. Each DeleteQueryDefinition operation can delete one query definition. You must have the logs:DeleteQueryDefinition permission to be able to perform this operation.

Arguments

• query_definition_id: The ID of the query definition that you want to delete. You can use DescribeQueryDefinitions to retrieve the IDs of your saved query definitions.

delete_resource_policy()
delete_resource_policy(params::Dict{String,<:Any})

Deletes a resource policy from this account. This revokes the access of the identities in that policy to put log events to this account.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "policyName": The name of the policy to be revoked. This parameter is required.

delete_retention_policy(log_group_name)
delete_retention_policy(log_group_name, params::Dict{String,<:Any})

Deletes the specified retention policy. Log events do not expire if they belong to log groups without a retention policy.

Arguments

• log_group_name: The name of the log group.

delete_subscription_filter(filter_name, log_group_name)
delete_subscription_filter(filter_name, log_group_name, params::Dict{String,<:Any})

Deletes the specified subscription filter.

Arguments

• filter_name: The name of the subscription filter.
• log_group_name: The name of the log group.

describe_account_policies(policy_type)
describe_account_policies(policy_type, params::Dict{String,<:Any})

Returns a list of all CloudWatch Logs account policies in the account.

Arguments

• policy_type: Use this parameter to limit the returned policies to only the policies that match the policy type that you specify.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "accountIdentifiers": If you are using an account that is set up as a monitoring account for CloudWatch unified cross-account observability, you can use this to specify the account ID of a source account. If you do, the operation returns the account policy for the specified account. Currently, you can specify only one account ID in this parameter. If you omit this parameter, only the policy in the current account is returned.
• "policyName": Use this parameter to limit the returned policies to only the policy with the name that you specify.

describe_deliveries()
describe_deliveries(params::Dict{String,<:Any})

Retrieves a list of the deliveries that have been created in the account. A delivery is a connection between a delivery source and a delivery destination . A delivery source represents an Amazon Web Services resource that sends logs to an logs delivery destination. The destination can be CloudWatch Logs, Amazon S3, or Firehose. Only some Amazon Web Services services support being configured as a delivery source. These services are listed in Enable logging from Amazon Web Services services.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "limit": Optionally specify the maximum number of deliveries to return in the response.
• "nextToken":

describe_delivery_destinations()
describe_delivery_destinations(params::Dict{String,<:Any})

Retrieves a list of the delivery destinations that have been created in the account.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "limit": Optionally specify the maximum number of delivery destinations to return in the response.
• "nextToken":

describe_delivery_sources()
describe_delivery_sources(params::Dict{String,<:Any})

Retrieves a list of the delivery sources that have been created in the account.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "limit": Optionally specify the maximum number of delivery sources to return in the response.
• "nextToken":

describe_destinations()
describe_destinations(params::Dict{String,<:Any})

Lists all your destinations. The results are ASCII-sorted by destination name.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "DestinationNamePrefix": The prefix to match. If you don't specify a value, no prefix filter is applied.
• "limit": The maximum number of items returned. If you don't specify a value, the default maximum value of 50 items is used.
• "nextToken": The token for the next set of items to return. (You received this token from a previous call.)

describe_export_tasks()
describe_export_tasks(params::Dict{String,<:Any})

Lists the specified export tasks. You can list all your export tasks or filter the results based on task ID or task status.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "limit": The maximum number of items returned. If you don't specify a value, the default is up to 50 items.
• "nextToken": The token for the next set of items to return. (You received this token from a previous call.)
• "statusCode": The status code of the export task. Specifying a status code filters the results to zero or more export tasks.
• "taskId": The ID of the export task. Specifying a task ID filters the results to one or zero export tasks.

describe_log_groups()
describe_log_groups(params::Dict{String,<:Any})

Lists the specified log groups. You can list all your log groups or filter the results by prefix. The results are ASCII-sorted by log group name. CloudWatch Logs doesn’t support IAM policies that control access to the DescribeLogGroups action by using the aws:ResourceTag/key-name condition key. Other CloudWatch Logs actions do support the use of the aws:ResourceTag/key-name condition key to control access. For more information about using tags to control access, see Controlling access to Amazon Web Services resources using tags. If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account and view data from the linked source accounts. For more information, see CloudWatch cross-account observability.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "accountIdentifiers": When includeLinkedAccounts is set to True, use this parameter to specify the list of accounts to search. You can specify as many as 20 account IDs in the array.
• "includeLinkedAccounts": If you are using a monitoring account, set this to True to have the operation return log groups in the accounts listed in accountIdentifiers. If this parameter is set to true and accountIdentifiers contains a null value, the operation returns all log groups in the monitoring account and all log groups in all source accounts that are linked to the monitoring account.
• "limit": The maximum number of items returned. If you don't specify a value, the default is up to 50 items.
• "logGroupClass": Specifies the log group class for this log group. There are two classes: The Standard log class supports all CloudWatch Logs features. The Infrequent Access log class supports a subset of CloudWatch Logs features and incurs lower costs. For details about the features supported by each class, see Log classes
• "logGroupNamePattern": If you specify a string for this parameter, the operation returns only log groups that have names that match the string based on a case-sensitive substring search. For example, if you specify Foo, log groups named FooBar, aws/Foo, and GroupFoo would match, but foo, F/o/o and Froo would not match. If you specify logGroupNamePattern in your request, then only arn, creationTime, and logGroupName are included in the response. logGroupNamePattern and logGroupNamePrefix are mutually exclusive. Only one of these parameters can be passed.
• "logGroupNamePrefix": The prefix to match. logGroupNamePrefix and logGroupNamePattern are mutually exclusive. Only one of these parameters can be passed.
• "nextToken": The token for the next set of items to return. (You received this token from a previous call.)

describe_log_streams()
describe_log_streams(params::Dict{String,<:Any})

Lists the log streams for the specified log group. You can list all the log streams or filter the results by prefix. You can also control how the results are ordered. You can specify the log group to search by using either logGroupIdentifier or logGroupName. You must include one of these two parameters, but you can't include both. This operation has a limit of five transactions per second, after which transactions are throttled. If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account and view data from the linked source accounts. For more information, see CloudWatch cross-account observability.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "descending": If the value is true, results are returned in descending order. If the value is to false, results are returned in ascending order. The default value is false.
• "limit": The maximum number of items returned. If you don't specify a value, the default is up to 50 items.
• "logGroupIdentifier": Specify either the name or ARN of the log group to view. If the log group is in a source account and you are using a monitoring account, you must use the log group ARN. You must include either logGroupIdentifier or logGroupName, but not both.
• "logGroupName": The name of the log group. You must include either logGroupIdentifier or logGroupName, but not both.
• "logStreamNamePrefix": The prefix to match. If orderBy is LastEventTime, you cannot specify this parameter.
• "nextToken": The token for the next set of items to return. (You received this token from a previous call.)
• "orderBy": If the value is LogStreamName, the results are ordered by log stream name. If the value is LastEventTime, the results are ordered by the event time. The default value is LogStreamName. If you order the results by event time, you cannot specify the logStreamNamePrefix parameter. lastEventTimestamp represents the time of the most recent log event in the log stream in CloudWatch Logs. This number is expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. lastEventTimestamp updates on an eventual consistency basis. It typically updates in less than an hour from ingestion, but in rare situations might take longer.

describe_metric_filters()
describe_metric_filters(params::Dict{String,<:Any})

Lists the specified metric filters. You can list all of the metric filters or filter the results by log name, prefix, metric name, or metric namespace. The results are ASCII-sorted by filter name.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "filterNamePrefix": The prefix to match. CloudWatch Logs uses the value that you set here only if you also include the logGroupName parameter in your request.
• "limit": The maximum number of items returned. If you don't specify a value, the default is up to 50 items.
• "logGroupName": The name of the log group.
• "metricName": Filters results to include only those with the specified metric name. If you include this parameter in your request, you must also include the metricNamespace parameter.
• "metricNamespace": Filters results to include only those in the specified namespace. If you include this parameter in your request, you must also include the metricName parameter.
• "nextToken": The token for the next set of items to return. (You received this token from a previous call.)

describe_queries()
describe_queries(params::Dict{String,<:Any})

Returns a list of CloudWatch Logs Insights queries that are scheduled, running, or have been run recently in this account. You can request all queries or limit it to queries of a specific log group or queries with a certain status.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "logGroupName": Limits the returned queries to only those for the specified log group.
• "maxResults": Limits the number of returned queries to the specified number.
• "nextToken":
• "status": Limits the returned queries to only those that have the specified status. Valid values are Cancelled, Complete, Failed, Running, and Scheduled.

describe_query_definitions()
describe_query_definitions(params::Dict{String,<:Any})

This operation returns a paginated list of your saved CloudWatch Logs Insights query definitions. You can retrieve query definitions from the current account or from a source account that is linked to the current account. You can use the queryDefinitionNamePrefix parameter to limit the results to only the query definitions that have names that start with a certain string.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "maxResults": Limits the number of returned query definitions to the specified number.
• "nextToken":
• "queryDefinitionNamePrefix": Use this parameter to filter your results to only the query definitions that have names that start with the prefix you specify.

describe_resource_policies()
describe_resource_policies(params::Dict{String,<:Any})

Lists the resource policies in this account.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "limit": The maximum number of resource policies to be displayed with one call of this API.
• "nextToken":

describe_subscription_filters(log_group_name)
describe_subscription_filters(log_group_name, params::Dict{String,<:Any})

Lists the subscription filters for the specified log group. You can list all the subscription filters or filter the results by prefix. The results are ASCII-sorted by filter name.

Arguments

• log_group_name: The name of the log group.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "filterNamePrefix": The prefix to match. If you don't specify a value, no prefix filter is applied.
• "limit": The maximum number of items returned. If you don't specify a value, the default is up to 50 items.
• "nextToken": The token for the next set of items to return. (You received this token from a previous call.)

disassociate_kms_key()
disassociate_kms_key(params::Dict{String,<:Any})

Disassociates the specified KMS key from the specified log group or from all CloudWatch Logs Insights query results in the account. When you use DisassociateKmsKey, you specify either the logGroupName parameter or the resourceIdentifier parameter. You can't specify both of those parameters in the same operation. Specify the logGroupName parameter to stop using the KMS key to encrypt future log events ingested and stored in the log group. Instead, they will be encrypted with the default CloudWatch Logs method. The log events that were ingested while the key was associated with the log group are still encrypted with that key. Therefore, CloudWatch Logs will need permissions for the key whenever that data is accessed. Specify the resourceIdentifier parameter with the query-result resource to stop using the KMS key to encrypt the results of all future StartQuery operations in the account. They will instead be encrypted with the default CloudWatch Logs method. The results from queries that ran while the key was associated with the account are still encrypted with that key. Therefore, CloudWatch Logs will need permissions for the key whenever that data is accessed. It can take up to 5 minutes for this operation to take effect.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "logGroupName": The name of the log group. In your DisassociateKmsKey operation, you must specify either the resourceIdentifier parameter or the logGroup parameter, but you can't specify both.
• "resourceIdentifier": Specifies the target for this operation. You must specify one of the following: Specify the ARN of a log group to stop having CloudWatch Logs use the KMS key to encrypt log events that are ingested and stored by that log group. After you run this operation, CloudWatch Logs encrypts ingested log events with the default CloudWatch Logs method. The log group ARN must be in the following format. Replace REGION and ACCOUNTID with your Region and account ID. arn:aws:logs:REGION:ACCOUNTID:log-group:LOGGROUPNAME Specify the following ARN to stop using this key to encrypt the results of future StartQuery operations in this account. Replace REGION and ACCOUNTID with your Region and account ID. arn:aws:logs:REGION:ACCOUNTID:query-result:* In your DisssociateKmsKey operation, you must specify either the resourceIdentifier parameter or the logGroup parameter, but you can't specify both.

filter_log_events()
filter_log_events(params::Dict{String,<:Any})

Lists log events from the specified log group. You can list all the log events or filter the results using a filter pattern, a time range, and the name of the log stream. You must have the logs:FilterLogEvents permission to perform this operation. You can specify the log group to search by using either logGroupIdentifier or logGroupName. You must include one of these two parameters, but you can't include both. By default, this operation returns as many log events as can fit in 1 MB (up to 10,000 log events) or all the events found within the specified time range. If the results include a token, that means there are more log events available. You can get additional results by specifying the token in a subsequent call. This operation can return empty results while there are more log events available through the token. The returned log events are sorted by event timestamp, the timestamp when the event was ingested by CloudWatch Logs, and the ID of the PutLogEvents request. If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account and view data from the linked source accounts. For more information, see CloudWatch cross-account observability.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "endTime": The end of the time range, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. Events with a timestamp later than this time are not returned.
• "filterPattern": The filter pattern to use. For more information, see Filter and Pattern Syntax. If not provided, all the events are matched.
• "interleaved": If the value is true, the operation attempts to provide responses that contain events from multiple log streams within the log group, interleaved in a single response. If the value is false, all the matched log events in the first log stream are searched first, then those in the next log stream, and so on. Important As of June 17, 2019, this parameter is ignored and the value is assumed to be true. The response from this operation always interleaves events from multiple log streams within a log group.
• "limit": The maximum number of events to return. The default is 10,000 events.
• "logGroupIdentifier": Specify either the name or ARN of the log group to view log events from. If the log group is in a source account and you are using a monitoring account, you must use the log group ARN. You must include either logGroupIdentifier or logGroupName, but not both.
• "logGroupName": The name of the log group to search. You must include either logGroupIdentifier or logGroupName, but not both.
• "logStreamNamePrefix": Filters the results to include only events from log streams that have names starting with this prefix. If you specify a value for both logStreamNamePrefix and logStreamNames, but the value for logStreamNamePrefix does not match any log stream names specified in logStreamNames, the action returns an InvalidParameterException error.
• "logStreamNames": Filters the results to only logs from the log streams in this list. If you specify a value for both logStreamNamePrefix and logStreamNames, the action returns an InvalidParameterException error.
• "nextToken": The token for the next set of events to return. (You received this token from a previous call.)
• "startTime": The start of the time range, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. Events with a timestamp before this time are not returned.
• "unmask": Specify true to display the log event fields with all sensitive data unmasked and visible. The default is false. To use this operation with this parameter, you must be signed into an account with the logs:Unmask permission.

get_data_protection_policy(log_group_identifier)
get_data_protection_policy(log_group_identifier, params::Dict{String,<:Any})

Returns information about a log group data protection policy.

Arguments

• log_group_identifier: The name or ARN of the log group that contains the data protection policy that you want to see.

get_delivery(id)
get_delivery(id, params::Dict{String,<:Any})

Returns complete information about one logical delivery. A delivery is a connection between a delivery source and a delivery destination . A delivery source represents an Amazon Web Services resource that sends logs to an logs delivery destination. The destination can be CloudWatch Logs, Amazon S3, or Firehose. Only some Amazon Web Services services support being configured as a delivery source. These services are listed in Enable logging from Amazon Web Services services. You need to specify the delivery id in this operation. You can find the IDs of the deliveries in your account with the DescribeDeliveries operation.

Arguments

• id: The ID of the delivery that you want to retrieve.

get_delivery_destination(name)
get_delivery_destination(name, params::Dict{String,<:Any})

Retrieves complete information about one delivery destination.

Arguments

• name: The name of the delivery destination that you want to retrieve.

get_delivery_destination_policy(delivery_destination_name)
get_delivery_destination_policy(delivery_destination_name, params::Dict{String,<:Any})

Retrieves the delivery destination policy assigned to the delivery destination that you specify. For more information about delivery destinations and their policies, see PutDeliveryDestinationPolicy.

Arguments

• delivery_destination_name: The name of the delivery destination that you want to retrieve the policy of.

get_delivery_source(name)
get_delivery_source(name, params::Dict{String,<:Any})

Retrieves complete information about one delivery source.

Arguments

• name: The name of the delivery source that you want to retrieve.

get_log_anomaly_detector(anomaly_detector_arn)
get_log_anomaly_detector(anomaly_detector_arn, params::Dict{String,<:Any})

Retrieves information about the log anomaly detector that you specify.

Arguments

• anomaly_detector_arn: The ARN of the anomaly detector to retrieve information about. You can find the ARNs of log anomaly detectors in your account by using the ListLogAnomalyDetectors operation.

get_log_events(log_stream_name)
get_log_events(log_stream_name, params::Dict{String,<:Any})

Lists log events from the specified log stream. You can list all of the log events or filter using a time range. By default, this operation returns as many log events as can fit in a response size of 1MB (up to 10,000 log events). You can get additional log events by specifying one of the tokens in a subsequent call. This operation can return empty results while there are more log events available through the token. If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account and view data from the linked source accounts. For more information, see CloudWatch cross-account observability. You can specify the log group to search by using either logGroupIdentifier or logGroupName. You must include one of these two parameters, but you can't include both.

Arguments

• log_stream_name: The name of the log stream.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "endTime": The end of the time range, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. Events with a timestamp equal to or later than this time are not included.
• "limit": The maximum number of log events returned. If you don't specify a limit, the default is as many log events as can fit in a response size of 1 MB (up to 10,000 log events).
• "logGroupIdentifier": Specify either the name or ARN of the log group to view events from. If the log group is in a source account and you are using a monitoring account, you must use the log group ARN. You must include either logGroupIdentifier or logGroupName, but not both.
• "logGroupName": The name of the log group. You must include either logGroupIdentifier or logGroupName, but not both.
• "nextToken": The token for the next set of items to return. (You received this token from a previous call.)
• "startFromHead": If the value is true, the earliest log events are returned first. If the value is false, the latest log events are returned first. The default value is false. If you are using a previous nextForwardToken value as the nextToken in this operation, you must specify true for startFromHead.
• "startTime": The start of the time range, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. Events with a timestamp equal to this time or later than this time are included. Events with a timestamp earlier than this time are not included.
• "unmask": Specify true to display the log event fields with all sensitive data unmasked and visible. The default is false. To use this operation with this parameter, you must be signed into an account with the logs:Unmask permission.

get_log_group_fields()
get_log_group_fields(params::Dict{String,<:Any})

Returns a list of the fields that are included in log events in the specified log group. Includes the percentage of log events that contain each field. The search is limited to a time period that you specify. You can specify the log group to search by using either logGroupIdentifier or logGroupName. You must specify one of these parameters, but you can't specify both. In the results, fields that start with @ are fields generated by CloudWatch Logs. For example, @timestamp is the timestamp of each log event. For more information about the fields that are generated by CloudWatch logs, see Supported Logs and Discovered Fields. The response results are sorted by the frequency percentage, starting with the highest percentage. If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account and view data from the linked source accounts. For more information, see CloudWatch cross-account observability.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "logGroupIdentifier": Specify either the name or ARN of the log group to view. If the log group is in a source account and you are using a monitoring account, you must specify the ARN. You must include either logGroupIdentifier or logGroupName, but not both.
• "logGroupName": The name of the log group to search. You must include either logGroupIdentifier or logGroupName, but not both.
• "time": The time to set as the center of the query. If you specify time, the 8 minutes before and 8 minutes after this time are searched. If you omit time, the most recent 15 minutes up to the current time are searched. The time value is specified as epoch time, which is the number of seconds since January 1, 1970, 00:00:00 UTC.

get_log_record(log_record_pointer)
get_log_record(log_record_pointer, params::Dict{String,<:Any})

Retrieves all of the fields and values of a single log event. All fields are retrieved, even if the original query that produced the logRecordPointer retrieved only a subset of fields. Fields are returned as field name/field value pairs. The full unparsed log event is returned within @message.

Arguments

• log_record_pointer: The pointer corresponding to the log event record you want to retrieve. You get this from the response of a GetQueryResults operation. In that response, the value of the @ptr field for a log event is the value to use as logRecordPointer to retrieve that complete log event record.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "unmask": Specify true to display the log event fields with all sensitive data unmasked and visible. The default is false. To use this operation with this parameter, you must be signed into an account with the logs:Unmask permission.

get_query_results(query_id)
get_query_results(query_id, params::Dict{String,<:Any})

Returns the results from the specified query. Only the fields requested in the query are returned, along with a @ptr field, which is the identifier for the log record. You can use the value of @ptr in a GetLogRecord operation to get the full log record. GetQueryResults does not start running a query. To run a query, use StartQuery. For more information about how long results of previous queries are available, see CloudWatch Logs quotas. If the value of the Status field in the output is Running, this operation returns only partial results. If you see a value of Scheduled or Running for the status, you can retry the operation later to see the final results. If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account to start queries in linked source accounts. For more information, see CloudWatch cross-account observability.

Arguments

• query_id: The ID number of the query.

list_anomalies()
list_anomalies(params::Dict{String,<:Any})

Returns a list of anomalies that log anomaly detectors have found. For details about the structure format of each anomaly object that is returned, see the example in this section.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "anomalyDetectorArn": Use this to optionally limit the results to only the anomalies found by a certain anomaly detector.
• "limit": The maximum number of items to return. If you don't specify a value, the default maximum value of 50 items is used.
• "nextToken":
• "suppressionState": You can specify this parameter if you want to the operation to return only anomalies that are currently either suppressed or unsuppressed.

list_log_anomaly_detectors()
list_log_anomaly_detectors(params::Dict{String,<:Any})

Retrieves a list of the log anomaly detectors in the account.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "filterLogGroupArn": Use this to optionally filter the results to only include anomaly detectors that are associated with the specified log group.
• "limit": The maximum number of items to return. If you don't specify a value, the default maximum value of 50 items is used.
• "nextToken":

list_tags_for_resource(resource_arn)
list_tags_for_resource(resource_arn, params::Dict{String,<:Any})

Displays the tags associated with a CloudWatch Logs resource. Currently, log groups and destinations support tagging.

Arguments

• resource_arn: The ARN of the resource that you want to view tags for. The ARN format of a log group is arn:aws:logs:Region:account-id:log-group:log-group-name The ARN format of a destination is arn:aws:logs:Region:account-id:destination:destination-name For more information about ARN format, see CloudWatch Logs resources and operations.

list_tags_log_group(log_group_name)
list_tags_log_group(log_group_name, params::Dict{String,<:Any})

The ListTagsLogGroup operation is on the path to deprecation. We recommend that you use ListTagsForResource instead. Lists the tags for the specified log group.

Arguments

• log_group_name: The name of the log group.

put_account_policy(policy_document, policy_name, policy_type)
put_account_policy(policy_document, policy_name, policy_type, params::Dict{String,<:Any})

Creates an account-level data protection policy or subscription filter policy that applies to all log groups or a subset of log groups in the account. Data protection policy A data protection policy can help safeguard sensitive data that's ingested by your log groups by auditing and masking the sensitive log data. Each account can have only one account-level data protection policy. Sensitive data is detected and masked when it is ingested into a log group. When you set a data protection policy, log events ingested into the log groups before that time are not masked. If you use PutAccountPolicy to create a data protection policy for your whole account, it applies to both existing log groups and all log groups that are created later in this account. The account-level policy is applied to existing log groups with eventual consistency. It might take up to 5 minutes before sensitive data in existing log groups begins to be masked. By default, when a user views a log event that includes masked data, the sensitive data is replaced by asterisks. A user who has the logs:Unmask permission can use a GetLogEvents or FilterLogEvents operation with the unmask parameter set to true to view the unmasked log events. Users with the logs:Unmask can also view unmasked data in the CloudWatch Logs console by running a CloudWatch Logs Insights query with the unmask query command. For more information, including a list of types of data that can be audited and masked, see Protect sensitive log data with masking. To use the PutAccountPolicy operation for a data protection policy, you must be signed on with the logs:PutDataProtectionPolicy and logs:PutAccountPolicy permissions. The PutAccountPolicy operation applies to all log groups in the account. You can use PutDataProtectionPolicy to create a data protection policy that applies to just one log group. If a log group has its own data protection policy and the account also has an account-level data protection policy, then the two policies are cumulative. Any sensitive term specified in either policy is masked. Subscription filter policy A subscription filter policy sets up a real-time feed of log events from CloudWatch Logs to other Amazon Web Services services. Account-level subscription filter policies apply to both existing log groups and log groups that are created later in this account. Supported destinations are Kinesis Data Streams, Firehose, and Lambda. When log events are sent to the receiving service, they are Base64 encoded and compressed with the GZIP format. The following destinations are supported for subscription filters: An Kinesis Data Streams data stream in the same account as the subscription policy, for same-account delivery. An Firehose data stream in the same account as the subscription policy, for same-account delivery. A Lambda function in the same account as the subscription policy, for same-account delivery. A logical destination in a different account created with PutDestination, for cross-account delivery. Kinesis Data Streams and Firehose are supported as logical destinations. Each account can have one account-level subscription filter policy. If you are updating an existing filter, you must specify the correct name in PolicyName. To perform a PutAccountPolicy subscription filter operation for any destination except a Lambda function, you must also have the iam:PassRole permission.

Arguments

• policy_document: Specify the policy, in JSON. Data protection policy A data protection policy must include two JSON blocks: The first block must include both a DataIdentifer array and an Operation property with an Audit action. The DataIdentifer array lists the types of sensitive data that you want to mask. For more information about the available options, see Types of data that you can mask. The Operation property with an Audit action is required to find the sensitive data terms. This Audit action must contain a FindingsDestination object. You can optionally use that FindingsDestination object to list one or more destinations to send audit findings to. If you specify destinations such as log groups, Firehose streams, and S3 buckets, they must already exist. The second block must include both a DataIdentifer array and an Operation property with an Deidentify action. The DataIdentifer array must exactly match the DataIdentifer array in the first block of the policy. The Operation property with the Deidentify action is what actually masks the data, and it must contain the "MaskConfig": {} object. The "MaskConfig": {} object must be empty. For an example data protection policy, see the Examples section on this page. The contents of the two DataIdentifer arrays must match exactly. In addition to the two JSON blocks, the policyDocument can also include Name, Description, and Version fields. The Name is different than the operation's policyName parameter, and is used as a dimension when CloudWatch Logs reports audit findings metrics to CloudWatch. The JSON specified in policyDocument can be up to 30,720 characters long. Subscription filter policy A subscription filter policy can include the following attributes in a JSON block: DestinationArn The ARN of the destination to deliver log events to. Supported destinations are: An Kinesis Data Streams data stream in the same account as the subscription policy, for same-account delivery. An Firehose data stream in the same account as the subscription policy, for same-account delivery. A Lambda function in the same account as the subscription policy, for same-account delivery. A logical destination in a different account created with PutDestination, for cross-account delivery. Kinesis Data Streams and Firehose are supported as logical destinations. RoleArn The ARN of an IAM role that grants CloudWatch Logs permissions to deliver ingested log events to the destination stream. You don't need to provide the ARN when you are working with a logical destination for cross-account delivery. FilterPattern A filter pattern for subscribing to a filtered stream of log events. DistributionThe method used to distribute log data to the destination. By default, log data is grouped by log stream, but the grouping can be set to Random for a more even distribution. This property is only applicable when the destination is an Kinesis Data Streams data stream.
• policy_name: A name for the policy. This must be unique within the account.
• policy_type: The type of policy that you're creating or updating.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "scope": Currently the only valid value for this parameter is ALL, which specifies that the data protection policy applies to all log groups in the account. If you omit this parameter, the default of ALL is used.
• "selectionCriteria": Use this parameter to apply the subscription filter policy to a subset of log groups in the account. Currently, the only supported filter is LogGroupName NOT IN []. The selectionCriteria string can be up to 25KB in length. The length is determined by using its UTF-8 bytes. Using the selectionCriteria parameter is useful to help prevent infinite loops. For more information, see Log recursion prevention. Specifing selectionCriteria is valid only when you specify SUBSCRIPTIONFILTERPOLICY for policyType.

put_data_protection_policy(log_group_identifier, policy_document)
put_data_protection_policy(log_group_identifier, policy_document, params::Dict{String,<:Any})

Creates a data protection policy for the specified log group. A data protection policy can help safeguard sensitive data that's ingested by the log group by auditing and masking the sensitive log data. Sensitive data is detected and masked when it is ingested into the log group. When you set a data protection policy, log events ingested into the log group before that time are not masked. By default, when a user views a log event that includes masked data, the sensitive data is replaced by asterisks. A user who has the logs:Unmask permission can use a GetLogEvents or FilterLogEvents operation with the unmask parameter set to true to view the unmasked log events. Users with the logs:Unmask can also view unmasked data in the CloudWatch Logs console by running a CloudWatch Logs Insights query with the unmask query command. For more information, including a list of types of data that can be audited and masked, see Protect sensitive log data with masking. The PutDataProtectionPolicy operation applies to only the specified log group. You can also use PutAccountPolicy to create an account-level data protection policy that applies to all log groups in the account, including both existing log groups and log groups that are created level. If a log group has its own data protection policy and the account also has an account-level data protection policy, then the two policies are cumulative. Any sensitive term specified in either policy is masked.

Arguments

• log_group_identifier: Specify either the log group name or log group ARN.
• policy_document: Specify the data protection policy, in JSON. This policy must include two JSON blocks: The first block must include both a DataIdentifer array and an Operation property with an Audit action. The DataIdentifer array lists the types of sensitive data that you want to mask. For more information about the available options, see Types of data that you can mask. The Operation property with an Audit action is required to find the sensitive data terms. This Audit action must contain a FindingsDestination object. You can optionally use that FindingsDestination object to list one or more destinations to send audit findings to. If you specify destinations such as log groups, Firehose streams, and S3 buckets, they must already exist. The second block must include both a DataIdentifer array and an Operation property with an Deidentify action. The DataIdentifer array must exactly match the DataIdentifer array in the first block of the policy. The Operation property with the Deidentify action is what actually masks the data, and it must contain the "MaskConfig": {} object. The "MaskConfig": {} object must be empty. For an example data protection policy, see the Examples section on this page. The contents of the two DataIdentifer arrays must match exactly. In addition to the two JSON blocks, the policyDocument can also include Name, Description, and Version fields. The Name is used as a dimension when CloudWatch Logs reports audit findings metrics to CloudWatch. The JSON specified in policyDocument can be up to 30,720 characters.

put_delivery_destination(delivery_destination_configuration, name)
put_delivery_destination(delivery_destination_configuration, name, params::Dict{String,<:Any})

Creates or updates a logical delivery destination. A delivery destination is an Amazon Web Services resource that represents an Amazon Web Services service that logs can be sent to. CloudWatch Logs, Amazon S3, and Firehose are supported as logs delivery destinations. To configure logs delivery between a supported Amazon Web Services service and a destination, you must do the following: Create a delivery source, which is a logical object that represents the resource that is actually sending the logs. For more information, see PutDeliverySource. Use PutDeliveryDestination to create a delivery destination, which is a logical object that represents the actual delivery destination. If you are delivering logs cross-account, you must use PutDeliveryDestinationPolicy in the destination account to assign an IAM policy to the destination. This policy allows delivery to that destination. Use CreateDelivery to create a delivery by pairing exactly one delivery source and one delivery destination. For more information, see CreateDelivery. You can configure a single delivery source to send logs to multiple destinations by creating multiple deliveries. You can also create multiple deliveries to configure multiple delivery sources to send logs to the same delivery destination. Only some Amazon Web Services services support being configured as a delivery source. These services are listed as Supported [V2 Permissions] in the table at Enabling logging from Amazon Web Services services. If you use this operation to update an existing delivery destination, all the current delivery destination parameters are overwritten with the new parameter values that you specify.

Arguments

• delivery_destination_configuration: A structure that contains the ARN of the Amazon Web Services resource that will receive the logs.
• name: A name for this delivery destination. This name must be unique for all delivery destinations in your account.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "outputFormat": The format for the logs that this delivery destination will receive.
• "tags": An optional list of key-value pairs to associate with the resource. For more information about tagging, see Tagging Amazon Web Services resources

put_delivery_destination_policy(delivery_destination_name, delivery_destination_policy)
put_delivery_destination_policy(delivery_destination_name, delivery_destination_policy, params::Dict{String,<:Any})

Creates and assigns an IAM policy that grants permissions to CloudWatch Logs to deliver logs cross-account to a specified destination in this account. To configure the delivery of logs from an Amazon Web Services service in another account to a logs delivery destination in the current account, you must do the following: Create a delivery source, which is a logical object that represents the resource that is actually sending the logs. For more information, see PutDeliverySource. Create a delivery destination, which is a logical object that represents the actual delivery destination. For more information, see PutDeliveryDestination. Use this operation in the destination account to assign an IAM policy to the destination. This policy allows delivery to that destination. Create a delivery by pairing exactly one delivery source and one delivery destination. For more information, see CreateDelivery. Only some Amazon Web Services services support being configured as a delivery source. These services are listed as Supported [V2 Permissions] in the table at Enabling logging from Amazon Web Services services. The contents of the policy must include two statements. One statement enables general logs delivery, and the other allows delivery to the chosen destination. See the examples for the needed policies.

Arguments

• delivery_destination_name: The name of the delivery destination to assign this policy to.
• delivery_destination_policy: The contents of the policy.

put_delivery_source(log_type, name, resource_arn)
put_delivery_source(log_type, name, resource_arn, params::Dict{String,<:Any})

Creates or updates a logical delivery source. A delivery source represents an Amazon Web Services resource that sends logs to an logs delivery destination. The destination can be CloudWatch Logs, Amazon S3, or Firehose. To configure logs delivery between a delivery destination and an Amazon Web Services service that is supported as a delivery source, you must do the following: Use PutDeliverySource to create a delivery source, which is a logical object that represents the resource that is actually sending the logs. Use PutDeliveryDestination to create a delivery destination, which is a logical object that represents the actual delivery destination. For more information, see PutDeliveryDestination. If you are delivering logs cross-account, you must use PutDeliveryDestinationPolicy in the destination account to assign an IAM policy to the destination. This policy allows delivery to that destination. Use CreateDelivery to create a delivery by pairing exactly one delivery source and one delivery destination. For more information, see CreateDelivery. You can configure a single delivery source to send logs to multiple destinations by creating multiple deliveries. You can also create multiple deliveries to configure multiple delivery sources to send logs to the same delivery destination. Only some Amazon Web Services services support being configured as a delivery source. These services are listed as Supported [V2 Permissions] in the table at Enabling logging from Amazon Web Services services. If you use this operation to update an existing delivery source, all the current delivery source parameters are overwritten with the new parameter values that you specify.

Arguments

• log_type: Defines the type of log that the source is sending. For Amazon CodeWhisperer, the valid value is EVENTLOGS. For IAM Identity Centerr, the valid value is ERRORLOGS. For Amazon WorkMail, the valid values are ACCESSCONTROLLOGS, AUTHENTICATIONLOGS, WORKMAILAVAILABILITYPROVIDERLOGS, and WORKMAILMAILBOXACCESS_LOGS.
• name: A name for this delivery source. This name must be unique for all delivery sources in your account.
• resource_arn: The ARN of the Amazon Web Services resource that is generating and sending logs. For example, arn:aws:workmail:us-east-1:123456789012:organization/m-1234EXAMPLEabcd1234abcd1234abcd1234

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "tags": An optional list of key-value pairs to associate with the resource. For more information about tagging, see Tagging Amazon Web Services resources

put_destination(destination_name, role_arn, target_arn)
put_destination(destination_name, role_arn, target_arn, params::Dict{String,<:Any})

Creates or updates a destination. This operation is used only to create destinations for cross-account subscriptions. A destination encapsulates a physical resource (such as an Amazon Kinesis stream). With a destination, you can subscribe to a real-time stream of log events for a different account, ingested using PutLogEvents. Through an access policy, a destination controls what is written to it. By default, PutDestination does not set any access policy with the destination, which means a cross-account user cannot call PutSubscriptionFilter against this destination. To enable this, the destination owner must call PutDestinationPolicy after PutDestination. To perform a PutDestination operation, you must also have the iam:PassRole permission.

Arguments

• destination_name: A name for the destination.
• role_arn: The ARN of an IAM role that grants CloudWatch Logs permissions to call the Amazon Kinesis PutRecord operation on the destination stream.
• target_arn: The ARN of an Amazon Kinesis stream to which to deliver matching log events.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "tags": An optional list of key-value pairs to associate with the resource. For more information about tagging, see Tagging Amazon Web Services resources

put_destination_policy(access_policy, destination_name)
put_destination_policy(access_policy, destination_name, params::Dict{String,<:Any})

Creates or updates an access policy associated with an existing destination. An access policy is an IAM policy document that is used to authorize claims to register a subscription filter against a given destination.

Arguments

• access_policy: An IAM policy document that authorizes cross-account users to deliver their log events to the associated destination. This can be up to 5120 bytes.
• destination_name: A name for an existing destination.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "forceUpdate": Specify true if you are updating an existing destination policy to grant permission to an organization ID instead of granting permission to individual Amazon Web Services accounts. Before you update a destination policy this way, you must first update the subscription filters in the accounts that send logs to this destination. If you do not, the subscription filters might stop working. By specifying true for forceUpdate, you are affirming that you have already updated the subscription filters. For more information, see Updating an existing cross-account subscription If you omit this parameter, the default of false is used.

put_log_events(log_events, log_group_name, log_stream_name)
put_log_events(log_events, log_group_name, log_stream_name, params::Dict{String,<:Any})

Uploads a batch of log events to the specified log stream. The sequence token is now ignored in PutLogEvents actions. PutLogEvents actions are always accepted and never return InvalidSequenceTokenException or DataAlreadyAcceptedException even if the sequence token is not valid. You can use parallel PutLogEvents actions on the same log stream. The batch of events must satisfy the following constraints: The maximum batch size is 1,048,576 bytes. This size is calculated as the sum of all event messages in UTF-8, plus 26 bytes for each log event. None of the log events in the batch can be more than 2 hours in the future. None of the log events in the batch can be more than 14 days in the past. Also, none of the log events can be from earlier than the retention period of the log group. The log events in the batch must be in chronological order by their timestamp. The timestamp is the time that the event occurred, expressed as the number of milliseconds after Jan 1, 1970 00:00:00 UTC. (In Amazon Web Services Tools for PowerShell and the Amazon Web Services SDK for .NET, the timestamp is specified in .NET format: yyyy-mm-ddThh:mm:ss. For example, 2017-09-15T13:45:30.) A batch of log events in a single request cannot span more than 24 hours. Otherwise, the operation fails. Each log event can be no larger than 256 KB. The maximum number of log events in a batch is 10,000. The quota of five requests per second per log stream has been removed. Instead, PutLogEvents actions are throttled based on a per-second per-account quota. You can request an increase to the per-second throttling quota by using the Service Quotas service. If a call to PutLogEvents returns "UnrecognizedClientException" the most likely cause is a non-valid Amazon Web Services access key ID or secret key.

Arguments

• log_events: The log events.
• log_group_name: The name of the log group.
• log_stream_name: The name of the log stream.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "sequenceToken": The sequence token obtained from the response of the previous PutLogEvents call. The sequenceToken parameter is now ignored in PutLogEvents actions. PutLogEvents actions are now accepted and never return InvalidSequenceTokenException or DataAlreadyAcceptedException even if the sequence token is not valid.

put_metric_filter(filter_name, filter_pattern, log_group_name, metric_transformations)
put_metric_filter(filter_name, filter_pattern, log_group_name, metric_transformations, params::Dict{String,<:Any})

Creates or updates a metric filter and associates it with the specified log group. With metric filters, you can configure rules to extract metric data from log events ingested through PutLogEvents. The maximum number of metric filters that can be associated with a log group is 100. When you create a metric filter, you can also optionally assign a unit and dimensions to the metric that is created. Metrics extracted from log events are charged as custom metrics. To prevent unexpected high charges, do not specify high-cardinality fields such as IPAddress or requestID as dimensions. Each different value found for a dimension is treated as a separate metric and accrues charges as a separate custom metric. CloudWatch Logs might disable a metric filter if it generates 1,000 different name/value pairs for your specified dimensions within one hour. You can also set up a billing alarm to alert you if your charges are higher than expected. For more information, see Creating a Billing Alarm to Monitor Your Estimated Amazon Web Services Charges.

Arguments

• filter_name: A name for the metric filter.
• filter_pattern: A filter pattern for extracting metric data out of ingested log events.
• log_group_name: The name of the log group.
• metric_transformations: A collection of information that defines how metric data gets emitted.

put_query_definition(name, query_string)
put_query_definition(name, query_string, params::Dict{String,<:Any})

Creates or updates a query definition for CloudWatch Logs Insights. For more information, see Analyzing Log Data with CloudWatch Logs Insights. To update a query definition, specify its queryDefinitionId in your request. The values of name, queryString, and logGroupNames are changed to the values that you specify in your update operation. No current values are retained from the current query definition. For example, imagine updating a current query definition that includes log groups. If you don't specify the logGroupNames parameter in your update operation, the query definition changes to contain no log groups. You must have the logs:PutQueryDefinition permission to be able to perform this operation.

Arguments

• name: A name for the query definition. If you are saving numerous query definitions, we recommend that you name them. This way, you can find the ones you want by using the first part of the name as a filter in the queryDefinitionNamePrefix parameter of DescribeQueryDefinitions.
• query_string: The query string to use for this definition. For more information, see CloudWatch Logs Insights Query Syntax.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "clientToken": Used as an idempotency token, to avoid returning an exception if the service receives the same request twice because of a network error.
• "logGroupNames": Use this parameter to include specific log groups as part of your query definition. If you are updating a query definition and you omit this parameter, then the updated definition will contain no log groups.
• "queryDefinitionId": If you are updating a query definition, use this parameter to specify the ID of the query definition that you want to update. You can use DescribeQueryDefinitions to retrieve the IDs of your saved query definitions. If you are creating a query definition, do not specify this parameter. CloudWatch generates a unique ID for the new query definition and include it in the response to this operation.

put_resource_policy()
put_resource_policy(params::Dict{String,<:Any})

Creates or updates a resource policy allowing other Amazon Web Services services to put log events to this account, such as Amazon Route 53. An account can have up to 10 resource policies per Amazon Web Services Region.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "policyDocument": Details of the new policy, including the identity of the principal that is enabled to put logs to this account. This is formatted as a JSON string. This parameter is required. The following example creates a resource policy enabling the Route 53 service to put DNS query logs in to the specified log group. Replace "logArn" with the ARN of your CloudWatch Logs resource, such as a log group or log stream. CloudWatch Logs also supports aws:SourceArn and aws:SourceAccount condition context keys. In the example resource policy, you would replace the value of SourceArn with the resource making the call from Route 53 to CloudWatch Logs. You would also replace the value of SourceAccount with the Amazon Web Services account ID making that call. { "Version": "2012-10-17", "Statement": [ { "Sid": "Route53LogsToCloudWatchLogs", "Effect": "Allow", "Principal": { "Service": [ "route53.amazonaws.com" ] }, "Action": "logs:PutLogEvents", "Resource": "logArn", "Condition": { "ArnLike": { "aws:SourceArn": "myRoute53ResourceArn" }, "StringEquals": { "aws:SourceAccount": "myAwsAccountId" } } } ] }
• "policyName": Name of the new policy. This parameter is required.

put_retention_policy(log_group_name, retention_in_days)
put_retention_policy(log_group_name, retention_in_days, params::Dict{String,<:Any})

Sets the retention of the specified log group. With a retention policy, you can configure the number of days for which to retain log events in the specified log group. CloudWatch Logs doesn’t immediately delete log events when they reach their retention setting. It typically takes up to 72 hours after that before log events are deleted, but in rare situations might take longer. To illustrate, imagine that you change a log group to have a longer retention setting when it contains log events that are past the expiration date, but haven’t been deleted. Those log events will take up to 72 hours to be deleted after the new retention date is reached. To make sure that log data is deleted permanently, keep a log group at its lower retention setting until 72 hours after the previous retention period ends. Alternatively, wait to change the retention setting until you confirm that the earlier log events are deleted. When log events reach their retention setting they are marked for deletion. After they are marked for deletion, they do not add to your archival storage costs anymore, even if they are not actually deleted until later. These log events marked for deletion are also not included when you use an API to retrieve the storedBytes value to see how many bytes a log group is storing.

Arguments

• log_group_name: The name of the log group.
• retention_in_days:

put_subscription_filter(destination_arn, filter_name, filter_pattern, log_group_name)
put_subscription_filter(destination_arn, filter_name, filter_pattern, log_group_name, params::Dict{String,<:Any})

Creates or updates a subscription filter and associates it with the specified log group. With subscription filters, you can subscribe to a real-time stream of log events ingested through PutLogEvents and have them delivered to a specific destination. When log events are sent to the receiving service, they are Base64 encoded and compressed with the GZIP format. The following destinations are supported for subscription filters: An Amazon Kinesis data stream belonging to the same account as the subscription filter, for same-account delivery. A logical destination created with PutDestination that belongs to a different account, for cross-account delivery. We currently support Kinesis Data Streams and Firehose as logical destinations. An Amazon Kinesis Data Firehose delivery stream that belongs to the same account as the subscription filter, for same-account delivery. An Lambda function that belongs to the same account as the subscription filter, for same-account delivery. Each log group can have up to two subscription filters associated with it. If you are updating an existing filter, you must specify the correct name in filterName. To perform a PutSubscriptionFilter operation for any destination except a Lambda function, you must also have the iam:PassRole permission.

Arguments

• destination_arn: The ARN of the destination to deliver matching log events to. Currently, the supported destinations are: An Amazon Kinesis stream belonging to the same account as the subscription filter, for same-account delivery. A logical destination (specified using an ARN) belonging to a different account, for cross-account delivery. If you're setting up a cross-account subscription, the destination must have an IAM policy associated with it. The IAM policy must allow the sender to send logs to the destination. For more information, see PutDestinationPolicy. A Kinesis Data Firehose delivery stream belonging to the same account as the subscription filter, for same-account delivery. A Lambda function belonging to the same account as the subscription filter, for same-account delivery.
• filter_name: A name for the subscription filter. If you are updating an existing filter, you must specify the correct name in filterName. To find the name of the filter currently associated with a log group, use DescribeSubscriptionFilters.
• filter_pattern: A filter pattern for subscribing to a filtered stream of log events.
• log_group_name: The name of the log group.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "distribution": The method used to distribute log data to the destination. By default, log data is grouped by log stream, but the grouping can be set to random for a more even distribution. This property is only applicable when the destination is an Amazon Kinesis data stream.
• "roleArn": The ARN of an IAM role that grants CloudWatch Logs permissions to deliver ingested log events to the destination stream. You don't need to provide the ARN when you are working with a logical destination for cross-account delivery.

start_live_tail(log_group_identifiers)
start_live_tail(log_group_identifiers, params::Dict{String,<:Any})

Starts a Live Tail streaming session for one or more log groups. A Live Tail session returns a stream of log events that have been recently ingested in the log groups. For more information, see Use Live Tail to view logs in near real time. The response to this operation is a response stream, over which the server sends live log events and the client receives them. The following objects are sent over the stream: A single LiveTailSessionStart object is sent at the start of the session. Every second, a LiveTailSessionUpdate object is sent. Each of these objects contains an array of the actual log events. If no new log events were ingested in the past second, the LiveTailSessionUpdate object will contain an empty array. The array of log events contained in a LiveTailSessionUpdate can include as many as 500 log events. If the number of log events matching the request exceeds 500 per second, the log events are sampled down to 500 log events to be included in each LiveTailSessionUpdate object. If your client consumes the log events slower than the server produces them, CloudWatch Logs buffers up to 10 LiveTailSessionUpdate events or 5000 log events, after which it starts dropping the oldest events. A SessionStreamingException object is returned if an unknown error occurs on the server side. A SessionTimeoutException object is returned when the session times out, after it has been kept open for three hours. You can end a session before it times out by closing the session stream or by closing the client that is receiving the stream. The session also ends if the established connection between the client and the server breaks. For examples of using an SDK to start a Live Tail session, see Start a Live Tail session using an Amazon Web Services SDK.

Arguments

• log_group_identifiers: An array where each item in the array is a log group to include in the Live Tail session. Specify each log group by its ARN. If you specify an ARN, the ARN can't end with an asterisk (*). You can include up to 10 log groups.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "logEventFilterPattern": An optional pattern to use to filter the results to include only log events that match the pattern. For example, a filter pattern of error 404 causes only log events that include both error and 404 to be included in the Live Tail stream. Regular expression filter patterns are supported. For more information about filter pattern syntax, see Filter and Pattern Syntax.
• "logStreamNamePrefixes": If you specify this parameter, then only log events in the log streams that have names that start with the prefixes that you specify here are included in the Live Tail session. If you specify this field, you can't also specify the logStreamNames field. You can specify this parameter only if you specify only one log group in logGroupIdentifiers.
• "logStreamNames": If you specify this parameter, then only log events in the log streams that you specify here are included in the Live Tail session. If you specify this field, you can't also specify the logStreamNamePrefixes field. You can specify this parameter only if you specify only one log group in logGroupIdentifiers.

start_query(end_time, query_string, start_time)
start_query(end_time, query_string, start_time, params::Dict{String,<:Any})

Schedules a query of a log group using CloudWatch Logs Insights. You specify the log group and time range to query and the query string to use. For more information, see CloudWatch Logs Insights Query Syntax. After you run a query using StartQuery, the query results are stored by CloudWatch Logs. You can use GetQueryResults to retrieve the results of a query, using the queryId that StartQuery returns. If you have associated a KMS key with the query results in this account, then StartQuery uses that key to encrypt the results when it stores them. If no key is associated with query results, the query results are encrypted with the default CloudWatch Logs encryption method. Queries time out after 60 minutes of runtime. If your queries are timing out, reduce the time range being searched or partition your query into a number of queries. If you are using CloudWatch cross-account observability, you can use this operation in a monitoring account to start a query in a linked source account. For more information, see CloudWatch cross-account observability. For a cross-account StartQuery operation, the query definition must be defined in the monitoring account. You can have up to 30 concurrent CloudWatch Logs insights queries, including queries that have been added to dashboards.

Arguments

• end_time: The end of the time range to query. The range is inclusive, so the specified end time is included in the query. Specified as epoch time, the number of seconds since January 1, 1970, 00:00:00 UTC.
• query_string: The query string to use. For more information, see CloudWatch Logs Insights Query Syntax.
• start_time: The beginning of the time range to query. The range is inclusive, so the specified start time is included in the query. Specified as epoch time, the number of seconds since January 1, 1970, 00:00:00 UTC.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "limit": The maximum number of log events to return in the query. If the query string uses the fields command, only the specified fields and their values are returned. The default is 1000.
• "logGroupIdentifiers": The list of log groups to query. You can include up to 50 log groups. You can specify them by the log group name or ARN. If a log group that you're querying is in a source account and you're using a monitoring account, you must specify the ARN of the log group here. The query definition must also be defined in the monitoring account. If you specify an ARN, the ARN can't end with an asterisk (*). A StartQuery operation must include exactly one of the following parameters: logGroupName, logGroupNames, or logGroupIdentifiers.
• "logGroupName": The log group on which to perform the query. A StartQuery operation must include exactly one of the following parameters: logGroupName, logGroupNames, or logGroupIdentifiers.
• "logGroupNames": The list of log groups to be queried. You can include up to 50 log groups. A StartQuery operation must include exactly one of the following parameters: logGroupName, logGroupNames, or logGroupIdentifiers.

stop_query(query_id)
stop_query(query_id, params::Dict{String,<:Any})

Stops a CloudWatch Logs Insights query that is in progress. If the query has already ended, the operation returns an error indicating that the specified query is not running.

Arguments

• query_id: The ID number of the query to stop. To find this ID number, use DescribeQueries.

tag_log_group(log_group_name, tags)
tag_log_group(log_group_name, tags, params::Dict{String,<:Any})

The TagLogGroup operation is on the path to deprecation. We recommend that you use TagResource instead. Adds or updates the specified tags for the specified log group. To list the tags for a log group, use ListTagsForResource. To remove tags, use UntagResource. For more information about tags, see Tag Log Groups in Amazon CloudWatch Logs in the Amazon CloudWatch Logs User Guide. CloudWatch Logs doesn’t support IAM policies that prevent users from assigning specified tags to log groups using the aws:Resource/key-name or aws:TagKeys condition keys. For more information about using tags to control access, see Controlling access to Amazon Web Services resources using tags.

Arguments

• log_group_name: The name of the log group.
• tags: The key-value pairs to use for the tags.

tag_resource(resource_arn, tags)
tag_resource(resource_arn, tags, params::Dict{String,<:Any})

Assigns one or more tags (key-value pairs) to the specified CloudWatch Logs resource. Currently, the only CloudWatch Logs resources that can be tagged are log groups and destinations. Tags can help you organize and categorize your resources. You can also use them to scope user permissions by granting a user permission to access or change only resources with certain tag values. Tags don't have any semantic meaning to Amazon Web Services and are interpreted strictly as strings of characters. You can use the TagResource action with a resource that already has tags. If you specify a new tag key for the alarm, this tag is appended to the list of tags associated with the alarm. If you specify a tag key that is already associated with the alarm, the new tag value that you specify replaces the previous value for that tag. You can associate as many as 50 tags with a CloudWatch Logs resource.

Arguments

• resource_arn: The ARN of the resource that you're adding tags to. The ARN format of a log group is arn:aws:logs:Region:account-id:log-group:log-group-name The ARN format of a destination is arn:aws:logs:Region:account-id:destination:destination-name For more information about ARN format, see CloudWatch Logs resources and operations.
• tags: The list of key-value pairs to associate with the resource.

test_metric_filter(filter_pattern, log_event_messages)
test_metric_filter(filter_pattern, log_event_messages, params::Dict{String,<:Any})

Tests the filter pattern of a metric filter against a sample of log event messages. You can use this operation to validate the correctness of a metric filter pattern.

Arguments

• filter_pattern:
• log_event_messages: The log event messages to test.

untag_log_group(log_group_name, tags)
untag_log_group(log_group_name, tags, params::Dict{String,<:Any})

The UntagLogGroup operation is on the path to deprecation. We recommend that you use UntagResource instead. Removes the specified tags from the specified log group. To list the tags for a log group, use ListTagsForResource. To add tags, use TagResource. CloudWatch Logs doesn’t support IAM policies that prevent users from assigning specified tags to log groups using the aws:Resource/key-name or aws:TagKeys condition keys.

Arguments

• log_group_name: The name of the log group.
• tags: The tag keys. The corresponding tags are removed from the log group.

untag_resource(resource_arn, tag_keys)
untag_resource(resource_arn, tag_keys, params::Dict{String,<:Any})

Removes one or more tags from the specified resource.

Arguments

• resource_arn: The ARN of the CloudWatch Logs resource that you're removing tags from. The ARN format of a log group is arn:aws:logs:Region:account-id:log-group:log-group-name The ARN format of a destination is arn:aws:logs:Region:account-id:destination:destination-name For more information about ARN format, see CloudWatch Logs resources and operations.
• tag_keys: The list of tag keys to remove from the resource.

update_anomaly(anomaly_detector_arn)
update_anomaly(anomaly_detector_arn, params::Dict{String,<:Any})

Use this operation to suppress anomaly detection for a specified anomaly or pattern. If you suppress an anomaly, CloudWatch Logs won’t report new occurrences of that anomaly and won't update that anomaly with new data. If you suppress a pattern, CloudWatch Logs won’t report any anomalies related to that pattern. You must specify either anomalyId or patternId, but you can't specify both parameters in the same operation. If you have previously used this operation to suppress detection of a pattern or anomaly, you can use it again to cause CloudWatch Logs to end the suppression. To do this, use this operation and specify the anomaly or pattern to stop suppressing, and omit the suppressionType and suppressionPeriod parameters.

Arguments

• anomaly_detector_arn: The ARN of the anomaly detector that this operation is to act on.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "anomalyId": If you are suppressing or unsuppressing an anomaly, specify its unique ID here. You can find anomaly IDs by using the ListAnomalies operation.
• "patternId": If you are suppressing or unsuppressing an pattern, specify its unique ID here. You can find pattern IDs by using the ListAnomalies operation.
• "suppressionPeriod": If you are temporarily suppressing an anomaly or pattern, use this structure to specify how long the suppression is to last.
• "suppressionType": Use this to specify whether the suppression to be temporary or infinite. If you specify LIMITED, you must also specify a suppressionPeriod. If you specify INFINITE, any value for suppressionPeriod is ignored.

update_log_anomaly_detector(anomaly_detector_arn, enabled)
update_log_anomaly_detector(anomaly_detector_arn, enabled, params::Dict{String,<:Any})

Updates an existing log anomaly detector.

Arguments

• anomaly_detector_arn: The ARN of the anomaly detector that you want to update.
• enabled: Use this parameter to pause or restart the anomaly detector.

Optional Parameters

Optional parameters can be passed as a params::Dict{String,<:Any}. Valid keys are:

• "anomalyVisibilityTime": The number of days to use as the life cycle of anomalies. After this time, anomalies are automatically baselined and the anomaly detector model will treat new occurrences of similar event as normal. Therefore, if you do not correct the cause of an anomaly during this time, it will be considered normal going forward and will not be detected.
• "evaluationFrequency": Specifies how often the anomaly detector runs and look for anomalies. Set this value according to the frequency that the log group receives new logs. For example, if the log group receives new log events every 10 minutes, then setting evaluationFrequency to FIFTEEN_MIN might be appropriate.
• "filterPattern":