using AWSSDK.EFS.create_file_system
create_file_system([::AWSConfig], arguments::Dict)
create_file_system([::AWSConfig]; CreationToken=, <keyword arguments>)

using AWSCore.Services.elasticfilesystem
elasticfilesystem([::AWSConfig], "POST", "/2015-02-01/file-systems", arguments::Dict)
elasticfilesystem([::AWSConfig], "POST", "/2015-02-01/file-systems", CreationToken=, <keyword arguments>)

CreateFileSystem Operation

Creates a new, empty file system. The operation requires a creation token in the request that Amazon EFS uses to ensure idempotent creation (calling the operation with same creation token has no effect). If a file system does not currently exist that is owned by the caller's AWS account with the specified creation token, this operation does the following:

• Creates a new, empty file system. The file system will have an Amazon EFS assigned ID, and an initial lifecycle state creating.

• Returns with the description of the created file system.

Otherwise, this operation returns a FileSystemAlreadyExists error with the ID of the existing file system.

Note

For basic use cases, you can use a randomly generated UUID for the creation token.

The idempotent operation allows you to retry a CreateFileSystem call without risk of creating an extra file system. This can happen when an initial call fails in a way that leaves it uncertain whether or not a file system was actually created. An example might be that a transport level timeout occurred or your connection was reset. As long as you use the same creation token, if the initial call had succeeded in creating a file system, the client can learn of its existence from the FileSystemAlreadyExists error.

Note

The CreateFileSystem call returns while the file system's lifecycle state is still creating. You can check the file system creation status by calling the DescribeFileSystems operation, which among other things returns the file system state.

This operation also takes an optional PerformanceMode parameter that you choose for your file system. We recommend generalPurpose performance mode for most file systems. File systems using the maxIO performance mode can scale to higher levels of aggregate throughput and operations per second with a tradeoff of slightly higher latencies for most file operations. The performance mode can't be changed after the file system has been created. For more information, see Amazon EFS: Performance Modes.

After the file system is fully created, Amazon EFS sets its lifecycle state to available, at which point you can create one or more mount targets for the file system in your VPC. For more information, see CreateMountTarget. You mount your Amazon EFS file system on an EC2 instances in your VPC via the mount target. For more information, see Amazon EFS: How it Works.

This operation requires permissions for the elasticfilesystem:CreateFileSystem action.

Arguments

CreationToken = ::String – Required

String of up to 64 ASCII characters. Amazon EFS uses this to ensure idempotent creation.

PerformanceMode = "generalPurpose" or "maxIO"

The PerformanceMode of the file system. We recommend generalPurpose performance mode for most file systems. File systems using the maxIO performance mode can scale to higher levels of aggregate throughput and operations per second with a tradeoff of slightly higher latencies for most file operations. This can't be changed after the file system has been created.

Encrypted = ::Bool

A boolean value that, if true, creates an encrypted file system. When creating an encrypted file system, you have the option of specifying a CreateFileSystemRequestKmsKeyId for an existing AWS Key Management Service (AWS KMS) customer master key (CMK). If you don't specify a CMK, then the default CMK for Amazon EFS, /aws/elasticfilesystem, is used to protect the encrypted file system.

KmsKeyId = ::String

The id of the AWS KMS CMK that will be used to protect the encrypted file system. This parameter is only required if you want to use a non-default CMK. If this parameter is not specified, the default CMK for Amazon EFS is used. This id can be in one of the following formats:

• Key ID - A unique identifier of the key. For example, 1234abcd-12ab-34cd-56ef-1234567890ab.

• ARN - An Amazon Resource Name for the key. For example, arn:aws:kms:us-west-2:111122223333:key/1234abcd-12ab-34cd-56ef-1234567890ab.

• Key alias - A previously created display name for a key. For example, alias/projectKey1.

• Key alias ARN - An Amazon Resource Name for a key alias. For example, arn:aws:kms:us-west-2:444455556666:alias/projectKey1.

Note that if the KmsKeyId is specified, the CreateFileSystemRequestEncrypted parameter must be set to true.

Returns

FileSystemDescription

Exceptions

BadRequest, InternalServerError, FileSystemAlreadyExists or FileSystemLimitExceeded.

Example: To create a new file system

This operation creates a new file system with the default generalpurpose performance mode.

Input:

[
    "CreationToken" => "tokenstring",
    "PerformanceMode" => "generalPurpose"
]

Output:

Dict(
    "CreationTime" => "1481841524.0",
    "CreationToken" => "tokenstring",
    "FileSystemId" => "fs-01234567",
    "LifeCycleState" => "creating",
    "NumberOfMountTargets" => 0,
    "OwnerId" => "012345678912",
    "PerformanceMode" => "generalPurpose",
    "SizeInBytes" => Dict(
        "Value" => 0
    )
)

See also: AWS API Documentation

using AWSSDK.EFS.create_mount_target
create_mount_target([::AWSConfig], arguments::Dict)
create_mount_target([::AWSConfig]; FileSystemId=, SubnetId=, <keyword arguments>)

using AWSCore.Services.elasticfilesystem
elasticfilesystem([::AWSConfig], "POST", "/2015-02-01/mount-targets", arguments::Dict)
elasticfilesystem([::AWSConfig], "POST", "/2015-02-01/mount-targets", FileSystemId=, SubnetId=, <keyword arguments>)

CreateMountTarget Operation

Creates a mount target for a file system. You can then mount the file system on EC2 instances via the mount target.

You can create one mount target in each Availability Zone in your VPC. All EC2 instances in a VPC within a given Availability Zone share a single mount target for a given file system. If you have multiple subnets in an Availability Zone, you create a mount target in one of the subnets. EC2 instances do not need to be in the same subnet as the mount target in order to access their file system. For more information, see Amazon EFS: How it Works.

In the request, you also specify a file system ID for which you are creating the mount target and the file system's lifecycle state must be available. For more information, see DescribeFileSystems.

In the request, you also provide a subnet ID, which determines the following:

• VPC in which Amazon EFS creates the mount target

• Availability Zone in which Amazon EFS creates the mount target

• IP address range from which Amazon EFS selects the IP address of the mount target (if you don't specify an IP address in the request)

After creating the mount target, Amazon EFS returns a response that includes, a MountTargetId and an IpAddress. You use this IP address when mounting the file system in an EC2 instance. You can also use the mount target's DNS name when mounting the file system. The EC2 instance on which you mount the file system via the mount target can resolve the mount target's DNS name to its IP address. For more information, see How it Works: Implementation Overview.

Note that you can create mount targets for a file system in only one VPC, and there can be only one mount target per Availability Zone. That is, if the file system already has one or more mount targets created for it, the subnet specified in the request to add another mount target must meet the following requirements:

• Must belong to the same VPC as the subnets of the existing mount targets

• Must not be in the same Availability Zone as any of the subnets of the existing mount targets

If the request satisfies the requirements, Amazon EFS does the following:

• Creates a new mount target in the specified subnet.

• Also creates a new network interface in the subnet as follows:

  • If the request provides an IpAddress, Amazon EFS assigns that IP address to the network interface. Otherwise, Amazon EFS assigns a free address in the subnet (in the same way that the Amazon EC2 CreateNetworkInterface call does when a request does not specify a primary private IP address).

  • If the request provides SecurityGroups, this network interface is associated with those security groups. Otherwise, it belongs to the default security group for the subnet's VPC.

  • Assigns the description Mount target *fsmt-id* for file system *fs-id* where *fsmt-id* is the mount target ID, and *fs-id* is the FileSystemId.

  • Sets the requesterManaged property of the network interface to true, and the requesterId value to EFS.

  Each Amazon EFS mount target has one corresponding requester-managed EC2 network interface. After the network interface is created, Amazon EFS sets the NetworkInterfaceId field in the mount target's description to the network interface ID, and the IpAddress field to its address. If network interface creation fails, the entire CreateMountTarget operation fails.

Note

The CreateMountTarget call returns only after creating the network interface, but while the mount target state is still creating, you can check the mount target creation status by calling the DescribeMountTargets operation, which among other things returns the mount target state.

We recommend you create a mount target in each of the Availability Zones. There are cost considerations for using a file system in an Availability Zone through a mount target created in another Availability Zone. For more information, see Amazon EFS. In addition, by always using a mount target local to the instance's Availability Zone, you eliminate a partial failure scenario. If the Availability Zone in which your mount target is created goes down, then you won't be able to access your file system through that mount target.

This operation requires permissions for the following action on the file system:

• elasticfilesystem:CreateMountTarget

This operation also requires permissions for the following Amazon EC2 actions:

• ec2:DescribeSubnets

• ec2:DescribeNetworkInterfaces

• ec2:CreateNetworkInterface

Arguments

FileSystemId = ::String – Required

ID of the file system for which to create the mount target.

SubnetId = ::String – Required

ID of the subnet to add the mount target in.

IpAddress = ::String

Valid IPv4 address within the address range of the specified subnet.

SecurityGroups = [::String, ...]

Up to five VPC security group IDs, of the form sg-xxxxxxxx. These must be for the same VPC as subnet specified.

Returns

MountTargetDescription

Exceptions

BadRequest, InternalServerError, FileSystemNotFound, IncorrectFileSystemLifeCycleState, MountTargetConflict, SubnetNotFound, NoFreeAddressesInSubnet, IpAddressInUse, NetworkInterfaceLimitExceeded, SecurityGroupLimitExceeded, SecurityGroupNotFound or UnsupportedAvailabilityZone.

Example: To create a new mount target

This operation creates a new mount target for an EFS file system.

Input:

[
    "FileSystemId" => "fs-01234567",
    "SubnetId" => "subnet-1234abcd"
]

Output:

Dict(
    "FileSystemId" => "fs-01234567",
    "IpAddress" => "192.0.0.2",
    "LifeCycleState" => "creating",
    "MountTargetId" => "fsmt-12340abc",
    "NetworkInterfaceId" => "eni-cedf6789",
    "OwnerId" => "012345678912",
    "SubnetId" => "subnet-1234abcd"
)

See also: AWS API Documentation

using AWSSDK.EFS.create_tags
create_tags([::AWSConfig], arguments::Dict)
create_tags([::AWSConfig]; FileSystemId=, Tags=)

using AWSCore.Services.elasticfilesystem
elasticfilesystem([::AWSConfig], "POST", "/2015-02-01/create-tags/{FileSystemId}", arguments::Dict)
elasticfilesystem([::AWSConfig], "POST", "/2015-02-01/create-tags/{FileSystemId}", FileSystemId=, Tags=)

CreateTags Operation

Creates or overwrites tags associated with a file system. Each tag is a key-value pair. If a tag key specified in the request already exists on the file system, this operation overwrites its value with the value provided in the request. If you add the Name tag to your file system, Amazon EFS returns it in the response to the DescribeFileSystems operation.

This operation requires permission for the elasticfilesystem:CreateTags action.

Arguments

FileSystemId = ::String – Required

ID of the file system whose tags you want to modify (String). This operation modifies the tags only, not the file system.

Tags = [[ ... ], ...] – Required

Array of Tag objects to add. Each Tag object is a key-value pair.

 Tags = [[
        "Key" => <required> ::String,
        "Value" => <required> ::String
    ], ...]

Exceptions

BadRequest, InternalServerError or FileSystemNotFound.

Example: To create a new tag

This operation creates a new tag for an EFS file system.

Input:

[
    "FileSystemId" => "fs-01234567",
    "Tags" => [
        [
            "Key" => "Name",
            "Value" => "MyFileSystem"
        ]
    ]
]

See also: AWS API Documentation

using AWSSDK.EFS.delete_file_system
delete_file_system([::AWSConfig], arguments::Dict)
delete_file_system([::AWSConfig]; FileSystemId=)

using AWSCore.Services.elasticfilesystem
elasticfilesystem([::AWSConfig], "DELETE", "/2015-02-01/file-systems/{FileSystemId}", arguments::Dict)
elasticfilesystem([::AWSConfig], "DELETE", "/2015-02-01/file-systems/{FileSystemId}", FileSystemId=)

DeleteFileSystem Operation

Deletes a file system, permanently severing access to its contents. Upon return, the file system no longer exists and you can't access any contents of the deleted file system.

You can't delete a file system that is in use. That is, if the file system has any mount targets, you must first delete them. For more information, see DescribeMountTargets and DeleteMountTarget.

Note

The DeleteFileSystem call returns while the file system state is still deleting. You can check the file system deletion status by calling the DescribeFileSystems operation, which returns a list of file systems in your account. If you pass file system ID or creation token for the deleted file system, the DescribeFileSystems returns a 404 FileSystemNotFound error.

This operation requires permissions for the elasticfilesystem:DeleteFileSystem action.

Arguments

FileSystemId = ::String – Required

ID of the file system you want to delete.

Exceptions

BadRequest, InternalServerError, FileSystemNotFound or FileSystemInUse.

Example: To delete a file system

This operation deletes an EFS file system.

Input:

[
    "FileSystemId" => "fs-01234567"
]

See also: AWS API Documentation

using AWSSDK.EFS.delete_mount_target
delete_mount_target([::AWSConfig], arguments::Dict)
delete_mount_target([::AWSConfig]; MountTargetId=)

using AWSCore.Services.elasticfilesystem
elasticfilesystem([::AWSConfig], "DELETE", "/2015-02-01/mount-targets/{MountTargetId}", arguments::Dict)
elasticfilesystem([::AWSConfig], "DELETE", "/2015-02-01/mount-targets/{MountTargetId}", MountTargetId=)

DeleteMountTarget Operation

Deletes the specified mount target.

This operation forcibly breaks any mounts of the file system via the mount target that is being deleted, which might disrupt instances or applications using those mounts. To avoid applications getting cut off abruptly, you might consider unmounting any mounts of the mount target, if feasible. The operation also deletes the associated network interface. Uncommitted writes may be lost, but breaking a mount target using this operation does not corrupt the file system itself. The file system you created remains. You can mount an EC2 instance in your VPC via another mount target.

This operation requires permissions for the following action on the file system:

• elasticfilesystem:DeleteMountTarget

Note

The DeleteMountTarget call returns while the mount target state is still deleting. You can check the mount target deletion by calling the DescribeMountTargets operation, which returns a list of mount target descriptions for the given file system.

The operation also requires permissions for the following Amazon EC2 action on the mount target's network interface:

• ec2:DeleteNetworkInterface

Arguments

MountTargetId = ::String – Required

ID of the mount target to delete (String).

Exceptions

BadRequest, InternalServerError, DependencyTimeout or MountTargetNotFound.

Example: To delete a mount target

This operation deletes a mount target.

Input:

[
    "MountTargetId" => "fsmt-12340abc"
]

See also: AWS API Documentation

using AWSSDK.EFS.delete_tags
delete_tags([::AWSConfig], arguments::Dict)
delete_tags([::AWSConfig]; FileSystemId=, TagKeys=)

using AWSCore.Services.elasticfilesystem
elasticfilesystem([::AWSConfig], "POST", "/2015-02-01/delete-tags/{FileSystemId}", arguments::Dict)
elasticfilesystem([::AWSConfig], "POST", "/2015-02-01/delete-tags/{FileSystemId}", FileSystemId=, TagKeys=)

DeleteTags Operation

Deletes the specified tags from a file system. If the DeleteTags request includes a tag key that does not exist, Amazon EFS ignores it and doesn't cause an error. For more information about tags and related restrictions, see Tag Restrictions in the AWS Billing and Cost Management User Guide.

This operation requires permissions for the elasticfilesystem:DeleteTags action.

Arguments

FileSystemId = ::String – Required

ID of the file system whose tags you want to delete (String).

TagKeys = [::String, ...] – Required

List of tag keys to delete.

Exceptions

BadRequest, InternalServerError or FileSystemNotFound.

Example: To delete tags for an EFS file system

This operation deletes tags for an EFS file system.

Input:

[
    "FileSystemId" => "fs-01234567",
    "TagKeys" => [
        "Name"
    ]
]

See also: AWS API Documentation

using AWSSDK.EFS.describe_file_systems
describe_file_systems([::AWSConfig], arguments::Dict)
describe_file_systems([::AWSConfig]; <keyword arguments>)

using AWSCore.Services.elasticfilesystem
elasticfilesystem([::AWSConfig], "GET", "/2015-02-01/file-systems", arguments::Dict)
elasticfilesystem([::AWSConfig], "GET", "/2015-02-01/file-systems", <keyword arguments>)

DescribeFileSystems Operation

Returns the description of a specific Amazon EFS file system if either the file system CreationToken or the FileSystemId is provided. Otherwise, it returns descriptions of all file systems owned by the caller's AWS account in the AWS Region of the endpoint that you're calling.

When retrieving all file system descriptions, you can optionally specify the MaxItems parameter to limit the number of descriptions in a response. If more file system descriptions remain, Amazon EFS returns a NextMarker, an opaque token, in the response. In this case, you should send a subsequent request with the Marker request parameter set to the value of NextMarker.

To retrieve a list of your file system descriptions, this operation is used in an iterative process, where DescribeFileSystems is called first without the Marker and then the operation continues to call it with the Marker parameter set to the value of the NextMarker from the previous response until the response has no NextMarker.

The implementation may return fewer than MaxItems file system descriptions while still including a NextMarker value.

The order of file systems returned in the response of one DescribeFileSystems call and the order of file systems returned across the responses of a multi-call iteration is unspecified.

This operation requires permissions for the elasticfilesystem:DescribeFileSystems action.

Arguments

MaxItems = ::Int

(Optional) Specifies the maximum number of file systems to return in the response (integer). This parameter value must be greater than 0. The number of items that Amazon EFS returns is the minimum of the MaxItems parameter specified in the request and the service's internal maximum number of items per page.

Marker = ::String

(Optional) Opaque pagination token returned from a previous DescribeFileSystems operation (String). If present, specifies to continue the list from where the returning call had left off.

CreationToken = ::String

(Optional) Restricts the list to the file system with this creation token (String). You specify a creation token when you create an Amazon EFS file system.

FileSystemId = ::String

(Optional) ID of the file system whose description you want to retrieve (String).

Returns

DescribeFileSystemsResponse

Exceptions

BadRequest, InternalServerError or FileSystemNotFound.

Example: To describe an EFS file system

This operation describes all of the EFS file systems in an account.

Input:

[

]

Output:

Dict(
    "FileSystems" => [
        Dict(
            "CreationTime" => "1481841524.0",
            "CreationToken" => "tokenstring",
            "FileSystemId" => "fs-01234567",
            "LifeCycleState" => "available",
            "Name" => "MyFileSystem",
            "NumberOfMountTargets" => 1,
            "OwnerId" => "012345678912",
            "PerformanceMode" => "generalPurpose",
            "SizeInBytes" => Dict(
                "Value" => 6144
            )
        )
    ]
)

See also: AWS API Documentation

using AWSSDK.EFS.describe_mount_target_security_groups
describe_mount_target_security_groups([::AWSConfig], arguments::Dict)
describe_mount_target_security_groups([::AWSConfig]; MountTargetId=)

using AWSCore.Services.elasticfilesystem
elasticfilesystem([::AWSConfig], "GET", "/2015-02-01/mount-targets/{MountTargetId}/security-groups", arguments::Dict)
elasticfilesystem([::AWSConfig], "GET", "/2015-02-01/mount-targets/{MountTargetId}/security-groups", MountTargetId=)

DescribeMountTargetSecurityGroups Operation

Returns the security groups currently in effect for a mount target. This operation requires that the network interface of the mount target has been created and the lifecycle state of the mount target is not deleted.

This operation requires permissions for the following actions:

• elasticfilesystem:DescribeMountTargetSecurityGroups action on the mount target's file system.

• ec2:DescribeNetworkInterfaceAttribute action on the mount target's network interface.

Arguments

MountTargetId = ::String – Required

ID of the mount target whose security groups you want to retrieve.

Returns

DescribeMountTargetSecurityGroupsResponse

Exceptions

BadRequest, InternalServerError, MountTargetNotFound or IncorrectMountTargetState.

Example: To describe the security groups for a mount target

This operation describes all of the security groups for a file system's mount target.

Input:

[
    "MountTargetId" => "fsmt-12340abc"
]

Output:

Dict(
    "SecurityGroups" => [
        "sg-fghi4567"
    ]
)

See also: AWS API Documentation

using AWSSDK.EFS.describe_mount_targets
describe_mount_targets([::AWSConfig], arguments::Dict)
describe_mount_targets([::AWSConfig]; <keyword arguments>)

using AWSCore.Services.elasticfilesystem
elasticfilesystem([::AWSConfig], "GET", "/2015-02-01/mount-targets", arguments::Dict)
elasticfilesystem([::AWSConfig], "GET", "/2015-02-01/mount-targets", <keyword arguments>)

DescribeMountTargets Operation

Returns the descriptions of all the current mount targets, or a specific mount target, for a file system. When requesting all of the current mount targets, the order of mount targets returned in the response is unspecified.

This operation requires permissions for the elasticfilesystem:DescribeMountTargets action, on either the file system ID that you specify in FileSystemId, or on the file system of the mount target that you specify in MountTargetId.

Arguments

MaxItems = ::Int

(Optional) Maximum number of mount targets to return in the response. It must be an integer with a value greater than zero.

Marker = ::String

(Optional) Opaque pagination token returned from a previous DescribeMountTargets operation (String). If present, it specifies to continue the list from where the previous returning call left off.

FileSystemId = ::String

(Optional) ID of the file system whose mount targets you want to list (String). It must be included in your request if MountTargetId is not included.

MountTargetId = ::String

(Optional) ID of the mount target that you want to have described (String). It must be included in your request if FileSystemId is not included.

Returns

DescribeMountTargetsResponse

Exceptions

BadRequest, InternalServerError, FileSystemNotFound or MountTargetNotFound.

Example: To describe the mount targets for a file system

This operation describes all of a file system's mount targets.

Input:

[
    "FileSystemId" => "fs-01234567"
]

Output:

Dict(
    "MountTargets" => [
        Dict(
            "FileSystemId" => "fs-01234567",
            "IpAddress" => "192.0.0.2",
            "LifeCycleState" => "available",
            "MountTargetId" => "fsmt-12340abc",
            "NetworkInterfaceId" => "eni-cedf6789",
            "OwnerId" => "012345678912",
            "SubnetId" => "subnet-1234abcd"
        )
    ]
)

See also: AWS API Documentation

using AWSSDK.EFS.describe_tags
describe_tags([::AWSConfig], arguments::Dict)
describe_tags([::AWSConfig]; FileSystemId=, <keyword arguments>)

using AWSCore.Services.elasticfilesystem
elasticfilesystem([::AWSConfig], "GET", "/2015-02-01/tags/{FileSystemId}/", arguments::Dict)
elasticfilesystem([::AWSConfig], "GET", "/2015-02-01/tags/{FileSystemId}/", FileSystemId=, <keyword arguments>)

DescribeTags Operation

Returns the tags associated with a file system. The order of tags returned in the response of one DescribeTags call and the order of tags returned across the responses of a multi-call iteration (when using pagination) is unspecified.

This operation requires permissions for the elasticfilesystem:DescribeTags action.

Arguments

MaxItems = ::Int

(Optional) Maximum number of file system tags to return in the response. It must be an integer with a value greater than zero.

Marker = ::String

(Optional) Opaque pagination token returned from a previous DescribeTags operation (String). If present, it specifies to continue the list from where the previous call left off.

FileSystemId = ::String – Required

ID of the file system whose tag set you want to retrieve.

Returns

DescribeTagsResponse

Exceptions

BadRequest, InternalServerError or FileSystemNotFound.

Example: To describe the tags for a file system

This operation describes all of a file system's tags.

Input:

[
    "FileSystemId" => "fs-01234567"
]

Output:

Dict(
    "Tags" => [
        Dict(
            "Key" => "Name",
            "Value" => "MyFileSystem"
        )
    ]
)

See also: AWS API Documentation

using AWSSDK.EFS.modify_mount_target_security_groups
modify_mount_target_security_groups([::AWSConfig], arguments::Dict)
modify_mount_target_security_groups([::AWSConfig]; MountTargetId=, <keyword arguments>)

using AWSCore.Services.elasticfilesystem
elasticfilesystem([::AWSConfig], "PUT", "/2015-02-01/mount-targets/{MountTargetId}/security-groups", arguments::Dict)
elasticfilesystem([::AWSConfig], "PUT", "/2015-02-01/mount-targets/{MountTargetId}/security-groups", MountTargetId=, <keyword arguments>)

ModifyMountTargetSecurityGroups Operation

Modifies the set of security groups in effect for a mount target.

When you create a mount target, Amazon EFS also creates a new network interface. For more information, see CreateMountTarget. This operation replaces the security groups in effect for the network interface associated with a mount target, with the SecurityGroups provided in the request. This operation requires that the network interface of the mount target has been created and the lifecycle state of the mount target is not deleted.

The operation requires permissions for the following actions:

• elasticfilesystem:ModifyMountTargetSecurityGroups action on the mount target's file system.

• ec2:ModifyNetworkInterfaceAttribute action on the mount target's network interface.

Arguments

MountTargetId = ::String – Required

ID of the mount target whose security groups you want to modify.

SecurityGroups = [::String, ...]

Array of up to five VPC security group IDs.

Exceptions

BadRequest, InternalServerError, MountTargetNotFound, IncorrectMountTargetState, SecurityGroupLimitExceeded or SecurityGroupNotFound.

Example: To modify the security groups associated with a mount target for a file system

This operation modifies the security groups associated with a mount target for a file system.

Input:

[
    "MountTargetId" => "fsmt-12340abc",
    "SecurityGroups" => [
        "sg-abcd1234"
    ]
]

See also: AWS API Documentation