AWSSDK.Firehose.jl

AWSSDK.Firehose

Amazon Kinesis Firehose API Reference

Amazon Kinesis Firehose is a fully managed service that delivers real-time streaming data to destinations such as Amazon Simple Storage Service (Amazon S3), Amazon Elasticsearch Service (Amazon ES), and Amazon Redshift.

This document is generated from apis/firehose-2015-08-04.normal.json. See JuliaCloud/AWSCore.jl.

AWSSDK.Firehose.create_delivery_stream — Function.
using AWSSDK.Firehose.create_delivery_stream
create_delivery_stream([::AWSConfig], arguments::Dict)
create_delivery_stream([::AWSConfig]; DeliveryStreamName=, <keyword arguments>)

using AWSCore.Services.firehose
firehose([::AWSConfig], "CreateDeliveryStream", arguments::Dict)
firehose([::AWSConfig], "CreateDeliveryStream", DeliveryStreamName=, <keyword arguments>)

CreateDeliveryStream Operation

Creates a delivery stream.

By default, you can create up to 20 delivery streams per region.

This is an asynchronous operation that immediately returns. The initial status of the delivery stream is CREATING. After the delivery stream is created, its status is ACTIVE and it now accepts data. Attempts to send data to a delivery stream that is not in the ACTIVE state cause an exception. To check the state of a delivery stream, use DescribeDeliveryStream.

A Kinesis Firehose delivery stream can be configured to receive records directly from providers using PutRecord or PutRecordBatch, or it can be configured to use an existing Kinesis stream as its source. To specify a Kinesis stream as input, set the DeliveryStreamType parameter to KinesisStreamAsSource, and provide the Kinesis stream ARN and role ARN in the KinesisStreamSourceConfiguration parameter.

A delivery stream is configured with a single destination: Amazon S3, Amazon ES, or Amazon Redshift. You must specify only one of the following destination configuration parameters: ExtendedS3DestinationConfiguration, S3DestinationConfiguration, ElasticsearchDestinationConfiguration, or RedshiftDestinationConfiguration.

When you specify S3DestinationConfiguration, you can also provide the following optional values: BufferingHints, EncryptionConfiguration, and CompressionFormat. By default, if no BufferingHints value is provided, Kinesis Firehose buffers data up to 5 MB or for 5 minutes, whichever condition is satisfied first. Note that BufferingHints is a hint, so there are some cases where the service cannot adhere to these conditions strictly; for example, record boundaries are such that the size is a little over or under the configured buffering size. By default, no encryption is performed. We strongly recommend that you enable encryption to ensure secure data storage in Amazon S3.

A few notes about Amazon Redshift as a destination:

  • An Amazon Redshift destination requires an S3 bucket as intermediate location, as Kinesis Firehose first delivers data to S3 and then uses COPY syntax to load data into an Amazon Redshift table. This is specified in the RedshiftDestinationConfiguration.S3Configuration parameter.

  • The compression formats SNAPPY or ZIP cannot be specified in RedshiftDestinationConfiguration.S3Configuration because the Amazon Redshift COPY operation that reads from the S3 bucket doesn't support these compression formats.

  • We strongly recommend that you use the user name and password you provide exclusively with Kinesis Firehose, and that the permissions for the account are restricted for Amazon Redshift INSERT permissions.

Kinesis Firehose assumes the IAM role that is configured as part of the destination. The role should allow the Kinesis Firehose principal to assume the role, and the role should have permissions that allow the service to deliver the data. For more information, see Amazon S3 Bucket Access in the Amazon Kinesis Firehose Developer Guide.

Arguments

DeliveryStreamName = ::String – Required

The name of the delivery stream. This name must be unique per AWS account in the same region. If the delivery streams are in different accounts or different regions, you can have multiple delivery streams with the same name.

DeliveryStreamType = "DirectPut" or "KinesisStreamAsSource"

The delivery stream type. This parameter can be one of the following values:

  • DirectPut: Provider applications access the delivery stream directly.

  • KinesisStreamAsSource: The delivery stream uses a Kinesis stream as a source.

KinesisStreamSourceConfiguration = [ ... ]

When a Kinesis stream is used as the source for the delivery stream, a KinesisStreamSourceConfiguration containing the Kinesis stream ARN and the role ARN for the source stream.

 KinesisStreamSourceConfiguration = [
        "KinesisStreamARN" => <required> ::String,
        "RoleARN" => <required> ::String
    ]

S3DestinationConfiguration = [ ... ]

[Deprecated] The destination in Amazon S3. You can specify only one destination.

 S3DestinationConfiguration = [
        "RoleARN" => <required> ::String,
        "BucketARN" => <required> ::String,
        "Prefix" =>  ::String,
        "BufferingHints" =>  [
            "SizeInMBs" =>  ::Int,
            "IntervalInSeconds" =>  ::Int
        ],
        "CompressionFormat" =>  "UNCOMPRESSED", "GZIP", "ZIP" or "Snappy",
        "EncryptionConfiguration" =>  [
            "NoEncryptionConfig" =>  "NoEncryption",
            "KMSEncryptionConfig" =>  ["AWSKMSKeyARN" => <required> ::String]
        ],
        "CloudWatchLoggingOptions" =>  [
            "Enabled" =>  ::Bool,
            "LogGroupName" =>  ::String,
            "LogStreamName" =>  ::String
        ]
    ]

ExtendedS3DestinationConfiguration = [ ... ]

The destination in Amazon S3. You can specify only one destination.

 ExtendedS3DestinationConfiguration = [
        "RoleARN" => <required> ::String,
        "BucketARN" => <required> ::String,
        "Prefix" =>  ::String,
        "BufferingHints" =>  [
            "SizeInMBs" =>  ::Int,
            "IntervalInSeconds" =>  ::Int
        ],
        "CompressionFormat" =>  "UNCOMPRESSED", "GZIP", "ZIP" or "Snappy",
        "EncryptionConfiguration" =>  [
            "NoEncryptionConfig" =>  "NoEncryption",
            "KMSEncryptionConfig" =>  ["AWSKMSKeyARN" => <required> ::String]
        ],
        "CloudWatchLoggingOptions" =>  [
            "Enabled" =>  ::Bool,
            "LogGroupName" =>  ::String,
            "LogStreamName" =>  ::String
        ],
        "ProcessingConfiguration" =>  [
            "Enabled" =>  ::Bool,
            "Processors" =>  [[
                "Type" => <required> "Lambda",
                "Parameters" =>  [[
                    "ParameterName" => <required> "LambdaArn" or "NumberOfRetries",
                    "ParameterValue" => <required> ::String
                ], ...]
            ], ...]
        ],
        "S3BackupMode" =>  "Disabled" or "Enabled",
        "S3BackupConfiguration" =>  [
            "RoleARN" => <required> ::String,
            "BucketARN" => <required> ::String,
            "Prefix" =>  ::String,
            "BufferingHints" =>  [
                "SizeInMBs" =>  ::Int,
                "IntervalInSeconds" =>  ::Int
            ],
            "CompressionFormat" =>  "UNCOMPRESSED", "GZIP", "ZIP" or "Snappy",
            "EncryptionConfiguration" =>  [
                "NoEncryptionConfig" =>  "NoEncryption",
                "KMSEncryptionConfig" =>  ["AWSKMSKeyARN" => <required> ::String]
            ],
            "CloudWatchLoggingOptions" =>  [
                "Enabled" =>  ::Bool,
                "LogGroupName" =>  ::String,
                "LogStreamName" =>  ::String
            ]
        ]
    ]

RedshiftDestinationConfiguration = [ ... ]

The destination in Amazon Redshift. You can specify only one destination.

 RedshiftDestinationConfiguration = [
        "RoleARN" => <required> ::String,
        "ClusterJDBCURL" => <required> ::String,
        "CopyCommand" => <required> [
            "DataTableName" => <required> ::String,
            "DataTableColumns" =>  ::String,
            "CopyOptions" =>  ::String
        ],
        "Username" => <required> ::String,
        "Password" => <required> ::String,
        "RetryOptions" =>  ["DurationInSeconds" =>  ::Int],
        "S3Configuration" => <required> [
            "RoleARN" => <required> ::String,
            "BucketARN" => <required> ::String,
            "Prefix" =>  ::String,
            "BufferingHints" =>  [
                "SizeInMBs" =>  ::Int,
                "IntervalInSeconds" =>  ::Int
            ],
            "CompressionFormat" =>  "UNCOMPRESSED", "GZIP", "ZIP" or "Snappy",
            "EncryptionConfiguration" =>  [
                "NoEncryptionConfig" =>  "NoEncryption",
                "KMSEncryptionConfig" =>  ["AWSKMSKeyARN" => <required> ::String]
            ],
            "CloudWatchLoggingOptions" =>  [
                "Enabled" =>  ::Bool,
                "LogGroupName" =>  ::String,
                "LogStreamName" =>  ::String
            ]
        ],
        "ProcessingConfiguration" =>  [
            "Enabled" =>  ::Bool,
            "Processors" =>  [[
                "Type" => <required> "Lambda",
                "Parameters" =>  [[
                    "ParameterName" => <required> "LambdaArn" or "NumberOfRetries",
                    "ParameterValue" => <required> ::String
                ], ...]
            ], ...]
        ],
        "S3BackupMode" =>  "Disabled" or "Enabled",
        "S3BackupConfiguration" =>  [
            "RoleARN" => <required> ::String,
            "BucketARN" => <required> ::String,
            "Prefix" =>  ::String,
            "BufferingHints" =>  [
                "SizeInMBs" =>  ::Int,
                "IntervalInSeconds" =>  ::Int
            ],
            "CompressionFormat" =>  "UNCOMPRESSED", "GZIP", "ZIP" or "Snappy",
            "EncryptionConfiguration" =>  [
                "NoEncryptionConfig" =>  "NoEncryption",
                "KMSEncryptionConfig" =>  ["AWSKMSKeyARN" => <required> ::String]
            ],
            "CloudWatchLoggingOptions" =>  [
                "Enabled" =>  ::Bool,
                "LogGroupName" =>  ::String,
                "LogStreamName" =>  ::String
            ]
        ],
        "CloudWatchLoggingOptions" =>  [
            "Enabled" =>  ::Bool,
            "LogGroupName" =>  ::String,
            "LogStreamName" =>  ::String
        ]
    ]

ElasticsearchDestinationConfiguration = [ ... ]

The destination in Amazon ES. You can specify only one destination.

 ElasticsearchDestinationConfiguration = [
        "RoleARN" => <required> ::String,
        "DomainARN" => <required> ::String,
        "IndexName" => <required> ::String,
        "TypeName" => <required> ::String,
        "IndexRotationPeriod" =>  "NoRotation", "OneHour", "OneDay", "OneWeek" or "OneMonth",
        "BufferingHints" =>  [
            "IntervalInSeconds" =>  ::Int,
            "SizeInMBs" =>  ::Int
        ],
        "RetryOptions" =>  ["DurationInSeconds" =>  ::Int],
        "S3BackupMode" =>  "FailedDocumentsOnly" or "AllDocuments",
        "S3Configuration" => <required> [
            "RoleARN" => <required> ::String,
            "BucketARN" => <required> ::String,
            "Prefix" =>  ::String,
            "BufferingHints" =>  [
                "SizeInMBs" =>  ::Int,
                "IntervalInSeconds" =>  ::Int
            ],
            "CompressionFormat" =>  "UNCOMPRESSED", "GZIP", "ZIP" or "Snappy",
            "EncryptionConfiguration" =>  [
                "NoEncryptionConfig" =>  "NoEncryption",
                "KMSEncryptionConfig" =>  ["AWSKMSKeyARN" => <required> ::String]
            ],
            "CloudWatchLoggingOptions" =>  [
                "Enabled" =>  ::Bool,
                "LogGroupName" =>  ::String,
                "LogStreamName" =>  ::String
            ]
        ],
        "ProcessingConfiguration" =>  [
            "Enabled" =>  ::Bool,
            "Processors" =>  [[
                "Type" => <required> "Lambda",
                "Parameters" =>  [[
                    "ParameterName" => <required> "LambdaArn" or "NumberOfRetries",
                    "ParameterValue" => <required> ::String
                ], ...]
            ], ...]
        ],
        "CloudWatchLoggingOptions" =>  [
            "Enabled" =>  ::Bool,
            "LogGroupName" =>  ::String,
            "LogStreamName" =>  ::String
        ]
    ]

Returns

CreateDeliveryStreamOutput

Exceptions

InvalidArgumentException, LimitExceededException or ResourceInUseException.

See also: AWS API Documentation

AWSSDK.Firehose.delete_delivery_stream — Function.
using AWSSDK.Firehose.delete_delivery_stream
delete_delivery_stream([::AWSConfig], arguments::Dict)
delete_delivery_stream([::AWSConfig]; DeliveryStreamName=)

using AWSCore.Services.firehose
firehose([::AWSConfig], "DeleteDeliveryStream", arguments::Dict)
firehose([::AWSConfig], "DeleteDeliveryStream", DeliveryStreamName=)

DeleteDeliveryStream Operation

Deletes a delivery stream and its data.

You can delete a delivery stream only if it is in ACTIVE or DELETING state, and not in the CREATING state. While the deletion request is in process, the delivery stream is in the DELETING state.

To check the state of a delivery stream, use DescribeDeliveryStream.

While the delivery stream is DELETING state, the service may continue to accept the records, but the service doesn't make any guarantees with respect to delivering the data. Therefore, as a best practice, you should first stop any applications that are sending records before deleting a delivery stream.

Arguments

DeliveryStreamName = ::String – Required

The name of the delivery stream.

Returns

DeleteDeliveryStreamOutput

Exceptions

ResourceInUseException or ResourceNotFoundException.

See also: AWS API Documentation

AWSSDK.Firehose.describe_delivery_stream — Function.
using AWSSDK.Firehose.describe_delivery_stream
describe_delivery_stream([::AWSConfig], arguments::Dict)
describe_delivery_stream([::AWSConfig]; DeliveryStreamName=, <keyword arguments>)

using AWSCore.Services.firehose
firehose([::AWSConfig], "DescribeDeliveryStream", arguments::Dict)
firehose([::AWSConfig], "DescribeDeliveryStream", DeliveryStreamName=, <keyword arguments>)

DescribeDeliveryStream Operation

Describes the specified delivery stream and gets the status. For example, after your delivery stream is created, call DescribeDeliveryStream to see if the delivery stream is ACTIVE and therefore ready for data to be sent to it.

Arguments

DeliveryStreamName = ::String – Required

The name of the delivery stream.

Limit = ::Int

The limit on the number of destinations to return. Currently, you can have one destination per delivery stream.

ExclusiveStartDestinationId = ::String

The ID of the destination to start returning the destination information. Currently, Kinesis Firehose supports one destination per delivery stream.

Returns

DescribeDeliveryStreamOutput

Exceptions

ResourceNotFoundException.

See also: AWS API Documentation

AWSSDK.Firehose.get_kinesis_stream — Function.
using AWSSDK.Firehose.get_kinesis_stream
get_kinesis_stream([::AWSConfig], arguments::Dict)
get_kinesis_stream([::AWSConfig]; DeliveryStreamARN=)

using AWSCore.Services.firehose
firehose([::AWSConfig], "GetKinesisStream", arguments::Dict)
firehose([::AWSConfig], "GetKinesisStream", DeliveryStreamARN=)

GetKinesisStream Operation

Arguments

DeliveryStreamARN = ::String – Required

Returns

GetKinesisStreamOutput

Exceptions

ResourceNotFoundException, InvalidArgumentException or InvalidStreamTypeException.

See also: AWS API Documentation

AWSSDK.Firehose.list_delivery_streams — Function.
using AWSSDK.Firehose.list_delivery_streams
list_delivery_streams([::AWSConfig], arguments::Dict)
list_delivery_streams([::AWSConfig]; <keyword arguments>)

using AWSCore.Services.firehose
firehose([::AWSConfig], "ListDeliveryStreams", arguments::Dict)
firehose([::AWSConfig], "ListDeliveryStreams", <keyword arguments>)

ListDeliveryStreams Operation

Lists your delivery streams.

The number of delivery streams might be too large to return using a single call to ListDeliveryStreams. You can limit the number of delivery streams returned, using the Limit parameter. To determine whether there are more delivery streams to list, check the value of HasMoreDeliveryStreams in the output. If there are more delivery streams to list, you can request them by specifying the name of the last delivery stream returned in the call in the ExclusiveStartDeliveryStreamName parameter of a subsequent call.

Arguments

Limit = ::Int

The maximum number of delivery streams to list.

DeliveryStreamType = "DirectPut" or "KinesisStreamAsSource"

The delivery stream type. This can be one of the following values:

  • DirectPut: Provider applications access the delivery stream directly.

  • KinesisStreamAsSource: The delivery stream uses a Kinesis stream as a source.

This parameter is optional. If this parameter is omitted, delivery streams of all types are returned.

ExclusiveStartDeliveryStreamName = ::String

The name of the delivery stream to start the list with.

Returns

ListDeliveryStreamsOutput

See also: AWS API Documentation

AWSSDK.Firehose.put_record — Function.
using AWSSDK.Firehose.put_record
put_record([::AWSConfig], arguments::Dict)
put_record([::AWSConfig]; DeliveryStreamName=, Record=)

using AWSCore.Services.firehose
firehose([::AWSConfig], "PutRecord", arguments::Dict)
firehose([::AWSConfig], "PutRecord", DeliveryStreamName=, Record=)

PutRecord Operation

Writes a single data record into an Amazon Kinesis Firehose delivery stream. To write multiple data records into a delivery stream, use PutRecordBatch. Applications using these operations are referred to as producers.

By default, each delivery stream can take in up to 2,000 transactions per second, 5,000 records per second, or 5 MB per second. Note that if you use PutRecord and PutRecordBatch, the limits are an aggregate across these two operations for each delivery stream. For more information about limits and how to request an increase, see Amazon Kinesis Firehose Limits.

You must specify the name of the delivery stream and the data record when using PutRecord. The data record consists of a data blob that can be up to 1,000 KB in size, and any kind of data, for example, a segment from a log file, geographic location data, website clickstream data, and so on.

Kinesis Firehose buffers records before delivering them to the destination. To disambiguate the data blobs at the destination, a common solution is to use delimiters in the data, such as a newline (\n) or some other character unique within the data. This allows the consumer application to parse individual data items when reading the data from the destination.

The PutRecord operation returns a RecordId, which is a unique string assigned to each record. Producer applications can use this ID for purposes such as auditability and investigation.

If the PutRecord operation throws a ServiceUnavailableException, back off and retry. If the exception persists, it is possible that the throughput limits have been exceeded for the delivery stream.

Data records sent to Kinesis Firehose are stored for 24 hours from the time they are added to a delivery stream as it attempts to send the records to the destination. If the destination is unreachable for more than 24 hours, the data is no longer available.

Arguments

DeliveryStreamName = ::String – Required

The name of the delivery stream.

Record = ["Data" => <required> blob] – Required

The record.

Returns

PutRecordOutput

Exceptions

ResourceNotFoundException, InvalidArgumentException or ServiceUnavailableException.

See also: AWS API Documentation

AWSSDK.Firehose.put_record_batch — Function.
using AWSSDK.Firehose.put_record_batch
put_record_batch([::AWSConfig], arguments::Dict)
put_record_batch([::AWSConfig]; DeliveryStreamName=, Records=)

using AWSCore.Services.firehose
firehose([::AWSConfig], "PutRecordBatch", arguments::Dict)
firehose([::AWSConfig], "PutRecordBatch", DeliveryStreamName=, Records=)

PutRecordBatch Operation

Writes multiple data records into a delivery stream in a single call, which can achieve higher throughput per producer than when writing single records. To write single data records into a delivery stream, use PutRecord. Applications using these operations are referred to as producers.

By default, each delivery stream can take in up to 2,000 transactions per second, 5,000 records per second, or 5 MB per second. If you use PutRecord and PutRecordBatch, the limits are an aggregate across these two operations for each delivery stream. For more information about limits, see Amazon Kinesis Firehose Limits.

Each PutRecordBatch request supports up to 500 records. Each record in the request can be as large as 1,000 KB (before 64-bit encoding), up to a limit of 4 MB for the entire request. These limits cannot be changed.

You must specify the name of the delivery stream and the data record when using PutRecord. The data record consists of a data blob that can be up to 1,000 KB in size, and any kind of data. For example, it could be a segment from a log file, geographic location data, web site clickstream data, and so on.

Kinesis Firehose buffers records before delivering them to the destination. To disambiguate the data blobs at the destination, a common solution is to use delimiters in the data, such as a newline (\n) or some other character unique within the data. This allows the consumer application to parse individual data items when reading the data from the destination.

The PutRecordBatch response includes a count of failed records, FailedPutCount, and an array of responses, RequestResponses. Each entry in the RequestResponses array provides additional information about the processed record. It directly correlates with a record in the request array using the same ordering, from the top to the bottom. The response array always includes the same number of records as the request array. RequestResponses includes both successfully and unsuccessfully processed records. Kinesis Firehose attempts to process all records in each PutRecordBatch request. A single record failure does not stop the processing of subsequent records.

A successfully processed record includes a RecordId value, which is unique for the record. An unsuccessfully processed record includes ErrorCode and ErrorMessage values. ErrorCode reflects the type of error, and is one of the following values: ServiceUnavailable or InternalFailure. ErrorMessage provides more detailed information about the error.

If there is an internal server error or a timeout, the write might have completed or it might have failed. If FailedPutCount is greater than 0, retry the request, resending only those records that might have failed processing. This minimizes the possible duplicate records and also reduces the total bytes sent (and corresponding charges). We recommend that you handle any duplicates at the destination.

If PutRecordBatch throws ServiceUnavailableException, back off and retry. If the exception persists, it is possible that the throughput limits have been exceeded for the delivery stream.

Data records sent to Kinesis Firehose are stored for 24 hours from the time they are added to a delivery stream as it attempts to send the records to the destination. If the destination is unreachable for more than 24 hours, the data is no longer available.

Arguments

DeliveryStreamName = ::String – Required

The name of the delivery stream.

Records = [["Data" => <required> blob], ...] – Required

One or more records.

Returns

PutRecordBatchOutput

Exceptions

ResourceNotFoundException, InvalidArgumentException or ServiceUnavailableException.

See also: AWS API Documentation

AWSSDK.Firehose.update_destination — Function.
using AWSSDK.Firehose.update_destination
update_destination([::AWSConfig], arguments::Dict)
update_destination([::AWSConfig]; DeliveryStreamName=, CurrentDeliveryStreamVersionId=, DestinationId=, <keyword arguments>)

using AWSCore.Services.firehose
firehose([::AWSConfig], "UpdateDestination", arguments::Dict)
firehose([::AWSConfig], "UpdateDestination", DeliveryStreamName=, CurrentDeliveryStreamVersionId=, DestinationId=, <keyword arguments>)

UpdateDestination Operation

Updates the specified destination of the specified delivery stream.

You can use this operation to change the destination type (for example, to replace the Amazon S3 destination with Amazon Redshift) or change the parameters associated with a destination (for example, to change the bucket name of the Amazon S3 destination). The update might not occur immediately. The target delivery stream remains active while the configurations are updated, so data writes to the delivery stream can continue during this process. The updated configurations are usually effective within a few minutes.

Note that switching between Amazon ES and other services is not supported. For an Amazon ES destination, you can only update to another Amazon ES destination.

If the destination type is the same, Kinesis Firehose merges the configuration parameters specified with the destination configuration that already exists on the delivery stream. If any of the parameters are not specified in the call, the existing values are retained. For example, in the Amazon S3 destination, if EncryptionConfiguration is not specified, then the existing EncryptionConfiguration is maintained on the destination.

If the destination type is not the same, for example, changing the destination from Amazon S3 to Amazon Redshift, Kinesis Firehose does not merge any parameters. In this case, all parameters must be specified.

Kinesis Firehose uses CurrentDeliveryStreamVersionId to avoid race conditions and conflicting merges. This is a required field, and the service updates the configuration only if the existing configuration has a version ID that matches. After the update is applied successfully, the version ID is updated, and can be retrieved using DescribeDeliveryStream. Use the new version ID to set CurrentDeliveryStreamVersionId in the next call.

Arguments

DeliveryStreamName = ::String – Required

The name of the delivery stream.

CurrentDeliveryStreamVersionId = ::String – Required

Obtain this value from the VersionId result of DeliveryStreamDescription. This value is required, and helps the service to perform conditional operations. For example, if there is an interleaving update and this value is null, then the update destination fails. After the update is successful, the VersionId value is updated. The service then performs a merge of the old configuration with the new configuration.

DestinationId = ::String – Required

The ID of the destination.

S3DestinationUpdate = [ ... ]

[Deprecated] Describes an update for a destination in Amazon S3.

 S3DestinationUpdate = [
        "RoleARN" =>  ::String,
        "BucketARN" =>  ::String,
        "Prefix" =>  ::String,
        "BufferingHints" =>  [
            "SizeInMBs" =>  ::Int,
            "IntervalInSeconds" =>  ::Int
        ],
        "CompressionFormat" =>  "UNCOMPRESSED", "GZIP", "ZIP" or "Snappy",
        "EncryptionConfiguration" =>  [
            "NoEncryptionConfig" =>  "NoEncryption",
            "KMSEncryptionConfig" =>  ["AWSKMSKeyARN" => <required> ::String]
        ],
        "CloudWatchLoggingOptions" =>  [
            "Enabled" =>  ::Bool,
            "LogGroupName" =>  ::String,
            "LogStreamName" =>  ::String
        ]
    ]

ExtendedS3DestinationUpdate = [ ... ]

Describes an update for a destination in Amazon S3.

 ExtendedS3DestinationUpdate = [
        "RoleARN" =>  ::String,
        "BucketARN" =>  ::String,
        "Prefix" =>  ::String,
        "BufferingHints" =>  [
            "SizeInMBs" =>  ::Int,
            "IntervalInSeconds" =>  ::Int
        ],
        "CompressionFormat" =>  "UNCOMPRESSED", "GZIP", "ZIP" or "Snappy",
        "EncryptionConfiguration" =>  [
            "NoEncryptionConfig" =>  "NoEncryption",
            "KMSEncryptionConfig" =>  ["AWSKMSKeyARN" => <required> ::String]
        ],
        "CloudWatchLoggingOptions" =>  [
            "Enabled" =>  ::Bool,
            "LogGroupName" =>  ::String,
            "LogStreamName" =>  ::String
        ],
        "ProcessingConfiguration" =>  [
            "Enabled" =>  ::Bool,
            "Processors" =>  [[
                "Type" => <required> "Lambda",
                "Parameters" =>  [[
                    "ParameterName" => <required> "LambdaArn" or "NumberOfRetries",
                    "ParameterValue" => <required> ::String
                ], ...]
            ], ...]
        ],
        "S3BackupMode" =>  "Disabled" or "Enabled",
        "S3BackupUpdate" =>  [
            "RoleARN" =>  ::String,
            "BucketARN" =>  ::String,
            "Prefix" =>  ::String,
            "BufferingHints" =>  [
                "SizeInMBs" =>  ::Int,
                "IntervalInSeconds" =>  ::Int
            ],
            "CompressionFormat" =>  "UNCOMPRESSED", "GZIP", "ZIP" or "Snappy",
            "EncryptionConfiguration" =>  [
                "NoEncryptionConfig" =>  "NoEncryption",
                "KMSEncryptionConfig" =>  ["AWSKMSKeyARN" => <required> ::String]
            ],
            "CloudWatchLoggingOptions" =>  [
                "Enabled" =>  ::Bool,
                "LogGroupName" =>  ::String,
                "LogStreamName" =>  ::String
            ]
        ]
    ]

RedshiftDestinationUpdate = [ ... ]

Describes an update for a destination in Amazon Redshift.

 RedshiftDestinationUpdate = [
        "RoleARN" =>  ::String,
        "ClusterJDBCURL" =>  ::String,
        "CopyCommand" =>  [
            "DataTableName" => <required> ::String,
            "DataTableColumns" =>  ::String,
            "CopyOptions" =>  ::String
        ],
        "Username" =>  ::String,
        "Password" =>  ::String,
        "RetryOptions" =>  ["DurationInSeconds" =>  ::Int],
        "S3Update" =>  [
            "RoleARN" =>  ::String,
            "BucketARN" =>  ::String,
            "Prefix" =>  ::String,
            "BufferingHints" =>  [
                "SizeInMBs" =>  ::Int,
                "IntervalInSeconds" =>  ::Int
            ],
            "CompressionFormat" =>  "UNCOMPRESSED", "GZIP", "ZIP" or "Snappy",
            "EncryptionConfiguration" =>  [
                "NoEncryptionConfig" =>  "NoEncryption",
                "KMSEncryptionConfig" =>  ["AWSKMSKeyARN" => <required> ::String]
            ],
            "CloudWatchLoggingOptions" =>  [
                "Enabled" =>  ::Bool,
                "LogGroupName" =>  ::String,
                "LogStreamName" =>  ::String
            ]
        ],
        "ProcessingConfiguration" =>  [
            "Enabled" =>  ::Bool,
            "Processors" =>  [[
                "Type" => <required> "Lambda",
                "Parameters" =>  [[
                    "ParameterName" => <required> "LambdaArn" or "NumberOfRetries",
                    "ParameterValue" => <required> ::String
                ], ...]
            ], ...]
        ],
        "S3BackupMode" =>  "Disabled" or "Enabled",
        "S3BackupUpdate" =>  [
            "RoleARN" =>  ::String,
            "BucketARN" =>  ::String,
            "Prefix" =>  ::String,
            "BufferingHints" =>  [
                "SizeInMBs" =>  ::Int,
                "IntervalInSeconds" =>  ::Int
            ],
            "CompressionFormat" =>  "UNCOMPRESSED", "GZIP", "ZIP" or "Snappy",
            "EncryptionConfiguration" =>  [
                "NoEncryptionConfig" =>  "NoEncryption",
                "KMSEncryptionConfig" =>  ["AWSKMSKeyARN" => <required> ::String]
            ],
            "CloudWatchLoggingOptions" =>  [
                "Enabled" =>  ::Bool,
                "LogGroupName" =>  ::String,
                "LogStreamName" =>  ::String
            ]
        ],
        "CloudWatchLoggingOptions" =>  [
            "Enabled" =>  ::Bool,
            "LogGroupName" =>  ::String,
            "LogStreamName" =>  ::String
        ]
    ]

ElasticsearchDestinationUpdate = [ ... ]

Describes an update for a destination in Amazon ES.

 ElasticsearchDestinationUpdate = [
        "RoleARN" =>  ::String,
        "DomainARN" =>  ::String,
        "IndexName" =>  ::String,
        "TypeName" =>  ::String,
        "IndexRotationPeriod" =>  "NoRotation", "OneHour", "OneDay", "OneWeek" or "OneMonth",
        "BufferingHints" =>  [
            "IntervalInSeconds" =>  ::Int,
            "SizeInMBs" =>  ::Int
        ],
        "RetryOptions" =>  ["DurationInSeconds" =>  ::Int],
        "S3Update" =>  [
            "RoleARN" =>  ::String,
            "BucketARN" =>  ::String,
            "Prefix" =>  ::String,
            "BufferingHints" =>  [
                "SizeInMBs" =>  ::Int,
                "IntervalInSeconds" =>  ::Int
            ],
            "CompressionFormat" =>  "UNCOMPRESSED", "GZIP", "ZIP" or "Snappy",
            "EncryptionConfiguration" =>  [
                "NoEncryptionConfig" =>  "NoEncryption",
                "KMSEncryptionConfig" =>  ["AWSKMSKeyARN" => <required> ::String]
            ],
            "CloudWatchLoggingOptions" =>  [
                "Enabled" =>  ::Bool,
                "LogGroupName" =>  ::String,
                "LogStreamName" =>  ::String
            ]
        ],
        "ProcessingConfiguration" =>  [
            "Enabled" =>  ::Bool,
            "Processors" =>  [[
                "Type" => <required> "Lambda",
                "Parameters" =>  [[
                    "ParameterName" => <required> "LambdaArn" or "NumberOfRetries",
                    "ParameterValue" => <required> ::String
                ], ...]
            ], ...]
        ],
        "CloudWatchLoggingOptions" =>  [
            "Enabled" =>  ::Bool,
            "LogGroupName" =>  ::String,
            "LogStreamName" =>  ::String
        ]
    ]

Returns

UpdateDestinationOutput

Exceptions

InvalidArgumentException, ResourceInUseException, ResourceNotFoundException or ConcurrentModificationException.

See also: AWS API Documentation